Camera Supports, Equipments & Accessories by SHAPE
Camera Supports & Accessories designed for both amateur and professional filmmakers and cameramen seeking
-
Shoulder & Sliding Baseplate (44)
SHAPE’s Baseplates and Shoulder Mounts are perfect for filmmakers seeking a high-performance, lightweight and sturdy camera support. -
Handles (48)
Camera Handles, Telescopic Handles, Camera Quick Handles, 15mm Rod Handles, Camera Cage Side Handles, Arri Rosette Handles, Microforce Handle Bracket -
Quick Release & Riser Systems (16)
Quick Release & Delta Plates designed to optimize the manipulation of your Camera. -
Arms, Mounts, Bags (41)
Designed to optimize the manipulation of your camera accessories.
-
- SHAPE Studio C-Stand Touch-Free Hand Sanitizer
- CAD$163.90
- Add to cartSCSTZ
- Touch-Free Stainless-Steel auto-dispenser with mounting clamps Help to reduce the spread of infection Designed with five levels of antibacterial hand gel supply from 0.5ml to 2.5ml Conform to COVID-19 protocols that productions, studios and rentals houses are implementing Extremely quiet operation, easy to install, easy setting button Built-in accurate Infrared motion sensor that detects your hand within one pass Compatible…
-
- SHAPE SMALL FLEX ARM 1/4-20 TO 1/4-20 MONITOR MOUNT
- CAD$43.99
- Add to cartFLEX1
- ¼-20 to ¼-20 mounting flex arm Perfect to mount and adjust monitor, LED lights, or microphones at any angle Adjustable 20 mm ball heads on both ends with rubber rings to hold the arm's position Large T-handle locking lever provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting Supports up to 5 lbs Length…
-
- SHAPE MEDIUM FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING
- CAD$65.99
- Add to cartFLEX2
- ¼-20 to 3/8-16 medium mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm's position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting…
-
- SHAPE LARGE FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING
- CAD$109.99
- Add to cartFLEX3
- ¼-20 to 3/8-16 large mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at almost any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm's position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy…
-
- SHAPE 11″ MAGIC ARM CENTRAL LOCK ROSETTE WITH 1/4-20 CAPTIVE SCREW
- CAD$43.99
- Add to cartM11CS
- 11 inches Magic Arm with three points of articulation Perfect to mount monitor, LED lights, or microphones Swivel mechanism with ball joints let you position your accessory to any angle Strong lock central rosette joint with thumb knob ¼-20 captive screw with very tight lock system Each end features a rubber-topped platform to tighten your accessory Supports up to 10…
-
- SHAPE 7″ MAGIC ARM CENTRAL LOCK ROSETTE WITH 1/4-20 CAPTIVE SCREW
- CAD$37.39
- Add to cartM7CS
- 7 inches Magic Arm with three points of articulation Perfect to mount monitor, LED lights, or microphones Swivel mechanism with ball joints let you position your accessory to any angle Strong lock central rosette joint with thumb knob ¼-20 captive screw with very tight lock system Each end features a rubber-topped platform to tighten your accessory Supports up to 8.8…
-
- SHAPE HIGH LOAD FRICTION ARM WITH CAMERA BRACKET
- CAD$137.50
- Add to cartLFWB
- High load friction arm with camera bracket Perfect to mount and adjust monitor, LED lights, or microphones at almost any angle Fully articulated arm with 90° pivotable and 360° rotatable ends Locking knob allows partial loosening for safe and precise positioning Ball joint at each end designed with 5/8" stud with 3/8” and ¼” female threads Supports up to 7…
-
- 3 side cold shoe aluminum mount
- CAD$22.00
- Add to cart3SHM
- Triple shoe mount made of CNC aluminum allows the use of multiple shoe rack accessories Perfect for vlogging and video shooting (3) Female cold shoe, perfect to attach microphone, LED video light or any other compatible devices (1) Male cold shoe designed with a thumbscrew knob with ¼-20 threaded hole to strongly attach the device to your camera body
-
- Aluminum camera holster with quick release
- CAD$64.90
- Add to cartHOLQ
- Camera holder which can be attached to a belt, strap, or saddle without wearing extra holster or neckband Perfect for running, mountaineering, outdoor sports and extreme sports Can be adapted to heavy SLR camera or smaller digital cameras Mount the CNC aluminum holster plate, designed with ¼-20 ring screw, to your camera Slide the holster into your belt, press both…
-
- Arri locating top handle
- CAD$53.90
- Add to cartALTH
- Top handle made of CNC Aluminum Top handle designed with multiple mounting options Designed with a 15 mm rod holder secured by a ratchet knob Strongly attach to the camera body with (1) 3/8-16 screw with anti-rotating locking pins (4) cold shoe attachment (1) 3/8-16 threaded hole with anti-rotating locking pins (4) 3/8-16 threaded holes (9) ¼-20 threaded holes
-
- Low profile mini quick release for monitors and accessories
- CAD$42.90
- Add to cartLPMQ
- Compact quick release plate with ¼-20 screw Universal mount plate perfect to mount monitors, GoPro and accessories 50 kg Load bearing Press both sides to unlock Anti-skid pad Sliding lock to avoid damage to the device caused by mis contact Deadlock mode button to keep top plate in place ¼-20 threaded holes at the bottom Made of CNC Aluminum
-
- Universal camera top handle
- CAD$53.90
- Add to cartUCTH
- Provides a comfortable grip and multiple accessory mounts for your DSLR, camcorder, or mirrorless camera Strongly attaches to your camera or cage's shoe mount Hexagonal knob provides quick, easy mounting on your camera or rig (3) female cold shoe attachment Cheese plate handle features (17) ¼-20 and (8) 3/8-16 threaded holes Lightweight and made of aluminum alloy anodized
-
- SHAPE Gold mount pivoting battery plate for monitor cage
- CAD$218.90
- Add to cartGPMC
- Gold Mount pivoting battery plate compatible with the Shogun 7 monitor only Push-button system let you tilt the battery plate up and down Easy access to the rear connector of the monitor Universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes Cheeseplate made of CNC Aluminum
-
- SHAPE V-mount pivoting battery plate for monitor cage
- CAD$218.90
- Add to cartVPMC
- V-Mount pivoting battery plate compatible with the Shogun 7 monitor only Push-button system let you tilt the battery plate up and down Easy access to the rear connector of the monitor Universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes Cheeseplate made of CNC Aluminum
-
- SHAPE camera bag
- CAD$273.90
- Add to cartSBAG
- Made of resistant fabric Outside: 12 x 20 x 12 in (30 x 50.8 x 30 cm) Inside: 11 x 20 x 10 in (27.9 x 50.8 x 25.4 cm) Volume: 36 liters 3 removable pouches (tools – pens – cables) “Molle” system pattern for removable pouches Led light zippers in inner pockets of cover Fully padded interior Removable rain-dust…
-
- Viewfinder adapter with Arri standard 3/8-16 interface male
- CAD$97.90
- Add to cartVFSA
- Viewfinder adapter compatible with the L-SHAPE pro top handle Designed with 15 mm standard clamp
-
- 15 mm rod clamp with Arri standard 3/8-16 interface male
- CAD$53.90
- Add to cartASTD15
- 15 mm rod clamp compatible with L-SHAPE pro top handle
-
- Sachtler tripod pan telescopic handle with push-button
- CAD$544.50
- Add to cartTRIPAN1
- Telescopic tripod pan handle with Sachtler rosette adapter Quick and easy installation to your Sachtler tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
- O’Connor tripod pan telescopic handle with push-button
- CAD$544.50
- Add to cartTRIPAN2
- Telescopic tripod pan handle with O'Connor rosette adapter Quick and easy installation to your O'Connor tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
- Cartoni tripod pan telescopic handle with push-button
- CAD$544.50
- Add to cartTRIPAN3
- Telescopic tripod pan handle with Cartoni rosette adapter Quick and easy installation to your Cartoni tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
- Telescopic SHAPE black handle Arri rosette cuff kit
- CAD$1,650.00
- Add to cartCUFKIT
- Let you connect your Arri Rosette Handles to your rig Clip the rod block onto your rig, and you're good to go (3) strong cuff let you switch between 15 to 19 mm LWS or Studio You can clip the cuff above or below the rods (1 pair) of telescopic handles with Push-button When you’re short on space, use the screwdriver included to shorten the Telescopic…
-
- 15 mm LWS cuff rod block Arri rosette
- CAD$218.90
- Add to cartCUF15
- Clamp Arri rosette handles or accessories on 15mm LWS rods Block for 15mm LWS (Light Weight Support) rods Block designed with a super strong cuff system and ratchet knob Designed with standards ARRI rosettes on each side
-
- 15 mm studio spacing cuff rod block Arri rosette
- CAD$218.90
- Add to cartCUFST
- Clamp Arri rosette handles or accessories on 15mm studio rods Block for 15mm studio rods Block designed with a super strong cuff system and ratchet knob Designed with standards ARRI rosettes on each side
-
- 19 mm studio cuff rod block Arri rosette
- CAD$218.90
- Add to cartCUF19
- Clamp Arri rosette handles or accessories on 19mm studio rods Block for 19mm studio rods Block designed with a super strong cuff system and ratchet knob Designed with standards ARRI rosettes on each side
-
- SHAPE cable clamp for Sony FX9 remote handle
- CAD$64.90
- Add to cartSCCRH
- Cable clamp for Sony FX9 remote handle CNC machined aluminium clamp designed to replace the original plastic locking system Designed to prevent cable pulls or disconnects Inside of the clamp is padded with rubber to prevent any damage of the cable
-
- SHAPE V-MOUNT PIVOTING BATTERY PLATE FOR SONY FX9
- CAD$434.50
- Add to cartVPBFX
- Attaches to the Rear of the Sony FX9 Camera Supports V-Mount Battery Access to BP-U Battery Allows Hot Swaps Swivel system let you pivot the battery plate horizontally Magnetic system to open and to close the back plate (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for Sony FX9 (15’’) Multiple holes on top and side of…
-
- SHAPE GOLD MOUNT PIVOTING BATTERY PLATE FOR SONY FX9
- CAD$434.50
- Add to cartGPBFX
- Attaches to the Rear of the Sony FX9 Camera Attaches to the Rear of the Sony FX9 Camera Supports Gold Mount Battery Access to BP-U Battery Allows Hot Swaps Swivel system let you pivot the battery plate horizontally Magnetic system to open and to close the back plate (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for…
-
- SHAPE 19.5V output D-Tap power cable for Sony FX9
- CAD$108.90
- Add to cartFX9PC
- D-Tap Power Cable for Sony FX9 Regulates the voltage to power an FX9 camera (19.5V) Allows you to power your camera using any V-mount or Gold mount battery Cable has a total end-to-end length of 15" (38 cm) Connector 1: 1 x D-Tap Connector 2: 1 x DC Barrel Converts 14.4 volt to 19.5 volt required to power the Sony…
-
- SHAPE controller top handle universal attachment system
- CAD$548.90
- Add to cartCTRL
- Modular top handle made of CNC aluminum and Canadian maple wood Perfect to attach more camera accessories Let you place the handgrip in the up, side and down positions Top handle also features several 3/8-16 anti rotating threaded holes The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear…
-
- T-SHAPE pro top handle with Arri standard thread
- CAD$295.90
- Add to cartTPST
- Modular Top handle with multiple threaded holes Perfect to attach more camera accessories The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear and oxidation Made of CNC aluminum
-
- L-SHAPE pro top handle with Arri standard thread
- CAD$207.90
- Add to cartLPHT
- Top handle with multiple threaded holes Perfect to attach more camera accessories The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear and oxidation Made of CNC aluminum
-
- SHAPE EVF adapter shoe dovetail Canon, Sony standard
- CAD$97.90
- Add to cartDVFCS
- Designed to attach OLED viewfinder Compatible with Canon and Sony viewfinder (Sony standard) Arri standard 3/8-16 male threaded with anti-rotating pins to be mounted on the top handle
-
- Friction swivel and tilt monitor light, microphone mount cold shoe base
- CAD$38.50
- Add to cartSTMC
- Perfect for the manipulation of your monitor, light or microphone Cold shoe mount with swivel option Strongly fix your accessory with ¼-20 captive thumbscrew and antirotating pin
-
- Offset monitor swivel rod mount 15 mm LW
- CAD$132.00
- Add to cartOMB15
- Allows you to offset your monitor on an inline configuration rig 8" 15 mm LW rod extension arm to mount your monitor to your rig Bracket let you attach your monitor with ¼-20 captive screw 15 mm rod clamp swivel mounts to 15 mm rods and allows change in the angle
-
- SHAPE FULL PLAY 26 V 260 WH rechargeable lithium-ion Gold-mount battery for light and cine camera
- CAD$548.90
- Add to cartG26LC
- Suitable for cine cameras and LED lights with 24 to 30V input Gold mount, chargeable lithium-ion battery, no memory effect Capacity: 26V 10AH 260WH When fully charged, up to 29V ; Power output stop at 21V Normal working current is 10A and maximum discharge up to 15A Will power a 1 x 1' Flex Cine Mat for approximately 2.4 hours.…
-
- SHAPE FULL PLAY 26 V 260 WH rechargeable lithium-ion V-mount battery for light and cine camera
- CAD$548.90
- Add to cartV26LC
- Suitable for cine cameras and LED lights with 24 to 30V input V-mount, chargeable lithium-ion battery, no memory effect Capacity: 26V 10AH 260WH When fully charged, up to 29V ; Power output stop at 21V Normal working current is 10A and maximum discharge up to 15A Will power a 1 x 1' Flex Cine Mat for approximately 2.4 hours. Feature…
-
- SHAPE FULL PLAY intelligent 4-channel Gold-mount lithium-ion charger for battery 26 V
- CAD$429.00
- Add to cartG26CH
- Charges up to 4 Gold mount batteries at the same time Compatible with 26V batteries only AC Input Power 100 to 240 VAC, 50 / 60 Hz Operating Temperature: 32 to 104°F / 0 to 40°C 4-level LED power indicator
-
- SHAPE FULL PLAY intelligent 4-channel V-mount lithium-ion charger for battery 26 V
- CAD$429.00
- Add to cartV26CH
- Charges up to 4 V-mount batteries at the same time Compatible with 26V batteries only AC Input Power 100 to 240 VAC, 50 / 60 Hz Operating Temperature: 32 to 104°F / 0 to 40°C 4-level LED power indicator
-
- SHAPE Nucleus double quick trigger grips
- CAD$621.50
- Add to cartNDQTG
- 2 clamps relocator brackets mounted on both sides of the SHAPE handle grip Designed to mount the left and right Tilta Nucleus-M wireless handle grips to SHAPE quick handle grips with black Push-button Clamps designed with 2 anti rotating pins to strongly keep the handle grips in place Clamps mounted on with a 3/8-16 captive screw Made of CNC aluminum
-
- SHAPE Nucleus handle clamp relocator
- CAD$42.90
- Add to cartNHCR
- Clamp relocator bracket Designed to mount the Tilta Nucleus-M wireless handle grip to the SHAPE quick handle grips with Push-button Designed with 2 anti rotating pins to strongly keep the handle grips in place Mounted on with a 3/8-16 captive screw Made of CNC aluminum
-
- SHAPE Nucleus trigger grips rod bloc
- CAD$328.90
- Add to cartNTGRB
- 2 clamps relocator brackets mounted on both sides of the SHAPE handle grip (HAND5) Designed to mount the left and right Tilta Nucleus-M wireless handle grips to SHAPE quick handle grips with Push-button Clamps designed with 2 anti rotating pins to strongly keep the handle grips in place Clamps mounted on with a 3/8-16 captive screw Made of CNC aluminum
-
- SSD drive universal aluminum duck station clamp
- CAD$53.90
- Add to cartSSDOC
- Hold your SSD drive Made of CNC Aluminum
-
- SHAPE 4k 2.0 HDMI to HDMI male coiled cable
- CAD$27.50
- Add to cartH204K
- HDMI to HDMI male coiled 4k 2.0 cable 16 to 32" Die-Cast HDMI (Type-A) Connector 3840*2160/60Hz Data Speed: 18Gbps Supports 4K at 60 fps Coiled design reduces clutter
-
- SHAPE 4k 2.0 HDMI to micro HDMI male coiled cable
- CAD$27.50
- Add to cartO204K
- HDMI to mini HDMI male coiled 4k 2.0 cable 16 to 32" Die-Cast HDMI (Type-D) Connector 3840*2160/60Hz Data Speed: 18Gbps Supports 4K at 60 fps Coiled design reduces clutter
-
- SHAPE 4k 2.0 HDMI to mini HDMI male coiled cable
- CAD$27.50
- Add to cartM204K
- HDMI to mini HDMI male coiled 4k 2.0 cable 16 to 32" Die-Cast HDMI (Type-C) Connector 3840*2160/60Hz Data Speed: 18Gbps Supports 4K at 60 fps Coiled design reduces clutter
-
- Revolt BP10 – VCT universal baseplate
- CAD$849.00
- Add to cartBP10
- Front to Back sliding plate for weight distribution Match your camera’s optical center Moveable shoulder pad made of slip-free material Made of CNC Machined Aluminum Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob Come with 2 pairs of 15 mm rods (8'', 4'') Designed with 2 standard Arri rosettes…
-
- Revolt VCT baseplate (BP10) with follow focus and matte box pro-kit
- CAD$3,110.00
- Add to cartBP15
- Front to Back sliding plate for weight distribution Match your camera’s optical center Moveable shoulder pad made of slip-free material Made of CNC Machined Aluminum Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob Come with 2 pairs of 15 mm rods (8'', 4'') Designed with 2 standard Arri rosettes…
-
- Revolt VCT baseplate (BP10) with hand12 shadow
- CAD$1,998.89
- Add to cartBP12
- Front to Back sliding plate for weight distribution Match your camera’s optical center Moveable shoulder pad made of slip-free material Made of CNC Machined Aluminum Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob Come with 2 pairs of 15 mm rods (8'', 4'') Designed with 2 standard Arri rosettes…
-
- Revolt VCT baseplate (BP10) with wooden handle grip
- CAD$1,261.11
- Add to cartBPW14
- Front to Back sliding plate for weight distribution Match your camera’s optical center Moveable shoulder pad made of slip-free material Made of CNC Machined Aluminum Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob Come with 2 pairs of 15 mm rods (8'', 4'') Designed with 2 standard Arri rosettes…
-
- Revolt sliding dovetail riser
- CAD$498.89
- Add to cartRSDR
- Sliding Balance Plate Wide Camera Compatibility 15 mm LWS Compatible Height-Adjustable Rod Clamp Spring-Loaded Levers Safety Catches
