Free Shipping to Canada & US on orders over $99
-
-
- SHAPE 4K-12G SDI COAXIAL CABLE 24″ 90 DEGREE CONNECTORS
-
CAD$86.90
- Add to cart
12G24
- High-quality 90-degree Male BNC to 90-degree Male BNC black cable; Designed to record/transfer video signals of both serial data and 12G 4K ProRes raw; Compatible with HD cameras, gimbals, monitors, EVF, antennas, SDI Wireless TX/RX set or other equipment’s with Serial Digital Interface (SDI); Length: 24’’ (60.96 cm) Thin Gauge Outer Diameter: 0.159 in Impedance: 75 ohms Frequency: DC to…
-
-
- Canon C70 baseplate, cage with handles, matte box, follow focus pro
-
CAD$2,858.90
- Add to cart
C70KIT
- Form fitting top, side and bottom plates L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle features a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory CANON C70 handle Made…
-
-
- Canon C70 baseplate, cage with handles
-
CAD$1,248.50
- Add to cart
C70BR
- Form fitting top, side and bottom plates L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle features a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Canon C70 handle Made…
-
-
- Canon C70 shoulder mount
-
CAD$713.90
- Add to cart
C70SM
- Designed to match the Canon C70 optical center Comes with an adapter plate Comes with (1 pair) 15 mm 12″ rods Mounting holes for securing the camera to a tripod plate Ratchet key knobs to secure rods Rubber pads at the top of the base to protect your CANON C70 Integrated HDMI Cable Clamp Made of CNC aluminum
-
-
- Canon C70 cage, top handle
-
CAD$603.90
- Add to cart
C70THC
- Form fitting top, side and bottom plates L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle features a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory CANON C70 handle Made…
-
-
- Canon C70 cage 15 mm LW rod system
-
CAD$504.90
- Add to cart
C70ROD
- Form fitting top, side and bottom plates Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory CANON C70 handle Made of CNC lightweight aluminum Mounting holes for securing the camera to a tripod plate Rubber pads at the top of the base to protect your CANON C70 Comes with (1 pair) 15 mm 12″ rods Ratchet…
-
-
- Canon C70 camera cage
-
CAD$361.90
- Add to cart
C70CAGE
- Form fitting top, side and bottom plates Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Canon C70 handle Made of CNC lightweight aluminum Mounting holes for securing the camera to a tripod plate Rubber pads at the top of the base to protect your Canon C70
-
-
- Canon C70 top plate
-
CAD$108.90
- Add to cart
C70TP
- Fits on your Canon C70 Multiple ¼”-20 screw holes along the top and sides Multiple ⅜”-16 screw holes with ARRI standard accessory mounts Canon Accessory Mounts stainless steel shoe in the center of top plate Cold Shoe offset for microphones, lights, etc. Lightweight and made of CNC aluminum
-
-
- SHAPE Gold mount pivoting battery plate for Canon C70
-
CAD$328.90
- Add to cart
GBC70
- Gold-Mount pivoting battery plate compatible with CANON C70 top plate (C70TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector and allows Battery hot swap feature (Please refer to the camera’s operating manual for proper usage) Supports Gold-Mount Battery (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for…
-
-
- SHAPE V-mount pivoting battery plate for Canon C70
-
CAD$328.90
- Add to cart
VBC70
- V-Mount pivoting battery plate compatible with CANON C70 top plate (C70TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector and allows Battery hot swap feature (Please refer to the camera’s operating manual for proper usage) Supports V-Mount Battery (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for…
-
-
-
-
-
- Sony FX6 baseplate with handle
-
CAD$1,043.90
- Add to cart
FX6BR
- FX6 cage, baseplate and left Arri rosette handle with Push-Button technology Baseplate with Arri rosette, shoulder mount and 15 mm rod system Front to back sliding plate for weight distribution Matches your camera’s optical center Shoulder pad made of slip-free material Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob…
-
-
- Sony FX6 baseplate and top plate with handle
-
CAD$1,098.90
- Add to cart
FX6BT
- FX6 top plate, baseplate and left Arri rosette handle with Push-Button technology Baseplate with Arri rosette, shoulder mount and 15 mm rod system Front to Back sliding plate for weight distribution Matches your camera’s optical center shoulder pad made of slip-free material Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet…
-
-
- Sony FX6 shoulder mount
-
CAD$768.90
- Add to cart
FX6SM
- Compatible with Sony FX6 Quick release baseplate with 15 mm rods 18″ Quick release handgrips with Push-button and 15 mm rod bloc Shoulder pad and back pad, padded for superior comfort
-
-
- Sony FX6 camera cage and 15 mm LW rod system
-
CAD$499.40
- Add to cart
FX6ROD
- Form fitting top, side and adapter plates Arri rosette mount on the side plate Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Sony FX6 handle Made of CNC lightweight aluminum Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws (1 pair) 15 mm 12″ rods Mounting holes for securing the camera on a tripod plate…
-
-
- Sony FX6 camera cage
-
CAD$328.90
- Add to cart
FX6CAGE
- Form fitting top, side and bottom plates Arri rosette mount on the side plate Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Sony FX6 handle Made of CNC lightweight aluminum
-
-
- Sony FX6 15 mm base
-
CAD$247.50
- Add to cart
B15FX6
- Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws Comes with an adapter plate Comes with (1 pair) 15 mm 12″ rods Mounting holes for securing the camera or a tripod plate Ratchet key knobs to secure rods removable rod bloc system at each end of the riser Rubber pads at the top of the base to protect your SONY…
-
-
- Sony FX6 top plate
-
CAD$108.90
- Add to cart
FX6TP
- Fits around the Sony FX6 top handle Lightweight and made of CNC aluminum Multiple 1/4-20 & 3/8-16 threaded holes with anti-rotating holes Designed with a threaded hole to insert your FX viewfinder cable clamp Designed to receive the SHAPE FX6VF assembly
-
-
- Sony FX6 Push-Button view finder mount
-
CAD$328.90
- Add to cart
FX6VF
- Sony FX6 viewfinder mount with 15 mm lightweight system rod bloc Designed with 15 mm SHAPE Patented Push-Button technology 2 Points of Articulation for horizontal and vertical adjustments Designed with monitor mount adapter for the Sony FX6 LCD screen monitor Can be mounted on one side only with the SHAPE rod clamp 15 mm (15CTH) Can be combined with either…
-
-
- Sony FX6 controller top handle
-
CAD$383.90
- Add to cart
CTRLF6
- Modular top handle with SHAPE Patented Push-Button technology Perfect to attach more camera accessories Lets you place the handgrip in the up, side and down positions Top handle also features several 3/8-16 anti rotating threaded holes The handgrip is made of Canadian maple to maximize ergonomy, comfort and security Connects to the native Sony FX6 top handle Tilts up and…
-
-
- Sony FX6 remote extension handle and cable
-
CAD$438.90
- Add to cart
FX6RH
- Compatible with SONY FX6 handle Includes male to female LANC Cable Easy to install and adjust Ratcheting lever to adjust the length (5 cm, 2 inches) Max Length: 11″; Folded Length: 5.6″ Designed with Arri rosettes to mount on the camera or baseplate Push-Button system with 360-degree rotation for several positioning options Push, adjust, release, and then it’s locked Made…
-
-
-
-
- Sony FX6 Gold Mount pivoting battery plate
-
CAD$434.50
- Add to cart
GBFX6
- Gold Mount pivoting battery plate compatible with SONY FX6 top plate (FX6TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector and allows BP-U Battery hot swap feature (Please refer to the camera’s operating manual for proper usage) Attaches to the Rear of the Sony FX6 top plate (FX6TP) Supports Gold-Mount…
-
-
- Sony FX6 V-Mount pivoting battery plate
-
CAD$434.50
- Add to cart
VBFX6
- V-Mount pivoting battery plate compatible with Sony FX6 top plate (FX6TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector and allows BP-U Battery hot swap feature (Please refer to the camera’s operating manual for proper usage) Attaches to the Rear of the Sony FX6 top plate (FX6TP) Supports V-Mount Battery…
-
-
- Sony FX6 D-Tap power cable with 19.5 V output
-
CAD$108.90
- Add to cart
FX6PC
- D-Tap Power Cable for Sony FX6 Regulates the voltage to power an FX6 camera (19.5V) Allows you to power your camera using any V-mount or Gold mount battery Cable has a total end-to-end length of 15″ (38 cm) Connector 1: 1 x D-Tap Connector 2: 1 x DC Barrel Converts 14.4 volt to 19.5 volt required to power the Sony…
-
-
- SHAPE BP dual LCD charger for Canon battery
-
CAD$64.90
- Add to cart
BP9CH
- Dual charging port designed to charge two batteries at the same time Wide range compatibility of charge (8.4 V / 12.6 V / 16.8 V) Intelligent MCU control identify the voltage of the battery and prevent overcharge Charger plate is suitable for most CANON camera/camcorder batteries USB Output, perfect to charge your smartphone and other USB devices when the AC…
-
-
-
-
- SHAPE RED® KOMODO™ camera cage, shoulder baseplate with handles
-
CAD$1,208.90
- Add to cart
KOMOBR
- Designed to match the RED® KOMODO™ optical center with or without the expander module Compact REVOLT shoulder baseplate (BP20) Quick handle Arri rosette with black Push-button system (Hand15) Patented Push-button technology Push, adjust, release, and then its lock Padded and comfortable Shoulder Pad L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top…
-
-
- SHAPE RED® KOMODO™ shoulder mount with Matte box and Follow Focus
-
CAD$1,868.90
- Add to cart
KOSMKIT
- Designed to match the RED® KOMODO™ optical center with or without the expander module Quick Handle with Rod Bloc and Push-button System Padded and comfortable Shoulder Pad 15 mm LW Baseplate system with adapter plate and sliding dovetail for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle…
-
-
- SHAPE RED® KOMODO™ kit with Matte box and Follow Focus
-
CAD$1,538.90
- Add to cart
KOKIT
- Designed to match the RED® KOMODO™ optical center with or without the expander module 15 mm LW baseplate, adapter plate and a dovetail spacer L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle feature a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb)…
-
-
- SHAPE RED® KOMODO™ shoulder mount
-
CAD$867.90
- Add to cart
KOMOSM
- Designed to match the RED® KOMODO™ optical center with or without the expander module Quick Handle with Rod Bloc and Push-button System Padded and comfortable Shoulder Pad 15 mm LW Baseplate system with adapter plate and sliding dovetail for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle…
-
-
- SHAPE camera cage with top handle for RED® KOMODO™
-
CAD$383.90
- Add to cart
KOTHC
- Three-piece cage kit and top handle for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle feature a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Top plate designed with 15 mm LW rod bloc clamp Side plates designed with…
-
-
- SHAPE full camera cage with 15 mm LW rod system for RED® KOMODO™
-
CAD$713.90
- Add to cart
KOROD
- Designed to match the RED® KOMODO™ optical center with or without the expander module 15 mm LW Baseplate system with adapter plate and sliding dovetail for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle feature a tilting bracket to mount a monitor, a video light, or a…
-
-
- SHAPE camera cage for RED® KOMODO™
-
CAD$218.90
- Add to cart
KOCAGE
- Three-piece cage kit for RED® KOMODO™ camera Designed with top plate with 15 mm LW rod bloc clamp Designed with ARRI rosette mount on the side plates Several anti rotating threaded holes (3/8-16, ¼-20) Made of CNC aluminum
-
-
- SHAPE RED® KOMODO™ Top Plate
-
CAD$163.90
- Add to cart
KOMOTP
- Top Plate for RED® KOMODO™ camera Designed with (2) removable 15 mm LW rod bloc clamp Several anti rotating threaded holes (3/8-16, ¼-20) Made of CNC aluminum
-
-
- SHAPE RED® KOMODO™ 15 mm lightweight Baseplate
-
CAD$328.90
- Add to cart
B15KOMO
- Designed to match the RED® KOMODO™ optical center 15 mm LW baseplate, adapter plate and a dovetail spacer The dovetail plate slides into the dovetail spacer Comes with a pair of 15 mm rods 12” Made of CNC aluminum
-
-
- SHAPE BP-975 Lithium-ion battery 7800 MAH for Canon and RED® KOMODO™
-
CAD$86.90
- Add to cart
BP975
- 7.4V, 7800mAh lithium-ion battery Compatible with RED® KOMODO™, Canon XF and C-series Battery duration: In 6K recording mode with RED® KOMODO™, approximately 130 minutes. *Battery duration may vary depending on the number of accessories plugged into the battery 4-LED lights Power gauge indicate remaining battery life Battery has no memory effect Comes with 5V micro-USB and USB port Dimensions: 70…
-
-
-
- SHAPE V-mount pivoting battery plate for RED® KOMODO™
-
CAD$383.90
- Add to cart
VPKOMO
- V-Mount pivoting battery plate with hot swap feature Enables you to use a pro-style V-Mount battery to power RED® KOMODO™ cameras, lights, monitors, microphones, or other devices Designed with a 15mm rod push-button Works with longer-lasting, pro-style V-Mount batteries Includes one D-Tap port with a maximum 12-17V, 50W output Compatible with select D-Tap powered cameras and accessories
-
-
- SHAPE Gold Mount pivoting battery plate for RED® KOMODO™
-
CAD$383.90
- Add to cart
GPKOMO
- Gold Mount pivoting battery plate with hot swap feature Enables you to use a pro-style Gold Mount battery to power RED® KOMODO™ cameras, lights, monitors, microphones, or other devices Designed with a 15mm rod push-button Works with longer-lasting, pro-style Gold Mount batteries Includes one D-Tap port with a maximum 12-17V, 50W output Compatible with select D-Tap powered cameras and accessories
-
-
-
- SHAPE Studio C-Stand Touch-Free Hand Sanitizer
-
CAD$163.90
- Add to cart
SCSTZ
- Touch-Free Stainless-Steel auto-dispenser with mounting clamps Help to reduce the spread of infection Designed with five levels of antibacterial hand gel supply from 0.5ml to 2.5ml Conform to COVID-19 protocols that productions, studios and rentals houses are implementing Extremely quiet operation, easy to install, easy setting button Built-in accurate Infrared motion sensor that detects your hand within one pass Compatible…
-
-
- SHAPE SMALL FLEX ARM 1/4-20 TO 1/4-20 MONITOR MOUNT
-
CAD$43.99
- Add to cart
FLEX1
- ¼-20 to ¼-20 mounting flex arm Perfect to mount and adjust monitor, LED lights, or microphones at any angle Adjustable 20 mm ball heads on both ends with rubber rings to hold the arm's position Large T-handle locking lever provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting Supports up to 5 lbs Length…
-
-
- SHAPE MEDIUM FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING
-
CAD$65.99
- Add to cart
FLEX2
- ¼-20 to 3/8-16 medium mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm's position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting…
-
-
- SHAPE LARGE FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING
-
CAD$109.99
- Add to cart
FLEX3
- ¼-20 to 3/8-16 large mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at almost any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm's position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy…
-
-
- SHAPE 11″ MAGIC ARM CENTRAL LOCK ROSETTE WITH 1/4-20 CAPTIVE SCREW
-
CAD$43.99
- Add to cart
M11CS
- 11 inches Magic Arm with three points of articulation Perfect to mount monitor, LED lights, or microphones Swivel mechanism with ball joints let you position your accessory to any angle Strong lock central rosette joint with thumb knob ¼-20 captive screw with very tight lock system Each end features a rubber-topped platform to tighten your accessory Supports up to 10…
