Kostenlose Lieferung bei Einkäufen über 99$ nach Kanada und in die Vereinigten Staaten von Amerika
-
-
-
CAD$22.00
- In den Warenkorb
3SHM
- Triple shoe mount made of CNC aluminum allows the use of multiple shoe rack accessories Perfect for vlogging and video shooting (3) Female cold shoe, perfect to attach microphone, LED video light or any other compatible devices (1) Male cold shoe designed with a thumbscrew knob with ¼-20 threaded hole to strongly attach the device to your camera body
-
-
Angebot!
-
CAD$64.90 CAD$55.17
- In den Warenkorb
HOLQ
- Camera holder which can be attached to a belt, strap, or saddle without wearing extra holster or neckband Perfect for running, mountaineering, outdoor sports and extreme sports Can be adapted to heavy SLR camera or smaller digital cameras Mount the CNC aluminum holster plate, designed with ¼-20 ring screw, to your camera Slide the holster into your belt, press both…
-
-
-
CAD$53.90
- In den Warenkorb
ALTH
- Top handle made of CNC Aluminum Top handle designed with multiple mounting options Designed with a 15 mm rod holder secured by a ratchet knob Strongly attach to the camera body with (1) 3/8-16 screw with anti-rotating locking pins (4) cold shoe attachment (1) 3/8-16 threaded hole with anti-rotating locking pins (4) 3/8-16 threaded holes (9) ¼-20 threaded holes
-
-
-
CAD$42.90
- In den Warenkorb
LPMQ
- Compact quick release plate with ¼-20 screw Universal mount plate perfect to mount monitors, GoPro and accessories 50 kg Load bearing Press both sides to unlock Anti-skid pad Sliding lock to avoid damage to the device caused by mis contact Deadlock mode button to keep top plate in place ¼-20 threaded holes at the bottom Made of CNC Aluminum
-
-
-
CAD$53.90
- In den Warenkorb
UCTH
- Provides a comfortable grip and multiple accessory mounts for your DSLR, camcorder, or mirrorless camera Strongly attaches to your camera or cage's shoe mount Hexagonal knob provides quick, easy mounting on your camera or rig (3) female cold shoe attachment Cheese plate handle features (17) ¼-20 and (8) 3/8-16 threaded holes Lightweight and made of aluminum alloy anodized
-
-
-
CAD$218.90
- In den Warenkorb
GPMC
- Gold Mount pivoting battery plate compatible with the Shogun 7 monitor only Push-button system let you tilt the battery plate up and down Easy access to the rear connector of the monitor Universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes Cheeseplate made of CNC Aluminum
-
-
-
CAD$218.90
- In den Warenkorb
VPMC
- V-Mount pivoting battery plate compatible with the Shogun 7 monitor only Push-button system let you tilt the battery plate up and down Easy access to the rear connector of the monitor Universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes Cheeseplate made of CNC Aluminum
-
-
-
CAD$273.90
- In den Warenkorb
SBAG
- Made of resistant fabric Outside: 12 x 20 x 12 in (30 x 50.8 x 30 cm) Inside: 11 x 20 x 10 in (27.9 x 50.8 x 25.4 cm) Volume: 36 liters 3 removable pouches (tools – pens – cables) “Molle” system pattern for removable pouches Led light zippers in inner pockets of cover Fully padded interior Removable rain-dust…
-
-
-
CAD$97.90
- In den Warenkorb
VFSA
- Viewfinder adapter compatible with the L-SHAPE pro top handle Designed with 15 mm standard clamp
-
-
-
CAD$53.90
- In den Warenkorb
ASTD15
- 15 mm rod clamp compatible with L-SHAPE pro top handle
-
-
-
CAD$544.50
- In den Warenkorb
TRIPAN1
- Telescopic tripod pan handle with Sachtler rosette adapter Quick and easy installation to your Sachtler tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
-
-
CAD$544.50
- In den Warenkorb
TRIPAN2
- Telescopic tripod pan handle with O'Connor rosette adapter Quick and easy installation to your O'Connor tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
-
-
CAD$544.50
- In den Warenkorb
TRIPAN3
- Telescopic tripod pan handle with Cartoni rosette adapter Quick and easy installation to your Cartoni tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
-
-
CAD$1,650.00
- In den Warenkorb
CUFKIT
- Let you connect your Arri Rosette Handles to your rig Clip the rod block onto your rig, and you're good to go (3) strong cuff let you switch between 15 to 19 mm LWS or Studio You can clip the cuff above or below the rods (1 pair) of telescopic handles with Push-button When you’re short on space, use the screwdriver included to shorten the Telescopic…
-
-
-
CAD$218.90
- In den Warenkorb
CUF15
- Clamp Arri rosette handles or accessories on 15mm LWS rods Block for 15mm LWS (Light Weight Support) rods Block designed with a super strong cuff system and ratchet knob Designed with standards ARRI rosettes on each side
-
-
-
CAD$218.90
- In den Warenkorb
CUFST
- Clamp Arri rosette handles or accessories on 15mm studio rods Block for 15mm studio rods Block designed with a super strong cuff system and ratchet knob Designed with standards ARRI rosettes on each side
-
-
-
CAD$218.90
- In den Warenkorb
CUF19
- Clamp Arri rosette handles or accessories on 19mm studio rods Block for 19mm studio rods Block designed with a super strong cuff system and ratchet knob Designed with standards ARRI rosettes on each side
-
-
-
CAD$64.90
- In den Warenkorb
SCCRH
- Cable clamp for Sony FX9 remote handle CNC machined aluminium clamp designed to replace the original plastic locking system Designed to prevent cable pulls or disconnects Inside of the clamp is padded with rubber to prevent any damage of the cable
-
-
-
CAD$434.50
- In den Warenkorb
VPBFX
- Attaches to the Rear of the Sony FX9 Camera Supports V-Mount Battery Access to BP-U Battery Allows Hot Swaps Swivel system let you pivot the battery plate horizontally Magnetic system to open and to close the back plate (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for Sony FX9 (15’’) Multiple holes on top and side of…
-
-
-
CAD$434.50
- In den Warenkorb
GPBFX
- Attaches to the Rear of the Sony FX9 Camera Attaches to the Rear of the Sony FX9 Camera Supports Gold Mount Battery Access to BP-U Battery Allows Hot Swaps Swivel system let you pivot the battery plate horizontally Magnetic system to open and to close the back plate (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for…
-
-
-
CAD$108.90
- In den Warenkorb
FX9PC
- D-Tap Power Cable for Sony FX9 Regulates the voltage to power an FX9 camera (19.5V) Allows you to power your camera using any V-mount or Gold mount battery Cable has a total end-to-end length of 15" (38 cm) Connector 1: 1 x D-Tap Connector 2: 1 x DC Barrel Converts 14.4 volt to 19.5 volt required to power the Sony…
-
-
-
CAD$548.90
- In den Warenkorb
CTRL
- Modular top handle made of CNC aluminum and Canadian maple wood Perfect to attach more camera accessories Let you place the handgrip in the up, side and down positions Top handle also features several 3/8-16 anti rotating threaded holes The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear…
-
-
-
CAD$295.90
- In den Warenkorb
TPST
- Modular Top handle with multiple threaded holes Perfect to attach more camera accessories The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear and oxidation Made of CNC aluminum
-
-
-
CAD$207.90
- In den Warenkorb
LPHT
- Top handle with multiple threaded holes Perfect to attach more camera accessories The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear and oxidation Made of CNC aluminum
-
-
-
CAD$97.90
- In den Warenkorb
DVFCS
- Designed to attach OLED viewfinder Compatible with Canon and Sony viewfinder (Sony standard) Arri standard 3/8-16 male threaded with anti-rotating pins to be mounted on the top handle
-
-
-
CAD$38.50
- In den Warenkorb
STMC
- Perfect for the manipulation of your monitor, light or microphone Cold shoe mount with swivel option Strongly fix your accessory with ¼-20 captive thumbscrew and antirotating pin
-
-
-
CAD$132.00
- In den Warenkorb
OMB15
- Allows you to offset your monitor on an inline configuration rig 8" 15 mm LW rod extension arm to mount your monitor to your rig Bracket let you attach your monitor with ¼-20 captive screw 15 mm rod clamp swivel mounts to 15 mm rods and allows change in the angle
-
-
-
CAD$603.90
- In den Warenkorb
G26LC
- Suitable for cine cameras and LED lights with 24 to 30V input Gold mount, chargeable lithium-ion battery, no memory effect Capacity: 26V 10AH 260WH When fully charged, up to 29V ; Power output stop at 21V Normal working current is 10A and maximum discharge up to 15A Will power a 1 x 1' Flex Cine Mat for approximately 2.4 hours.…
-
-
-
CAD$603.90
- In den Warenkorb
V26LC
- Suitable for cine cameras and LED lights with 24 to 30V input V-mount, chargeable lithium-ion battery, no memory effect Capacity: 26V 10AH 260WH When fully charged, up to 29V ; Power output stop at 21V Normal working current is 10A and maximum discharge up to 15A Will power a 1 x 1' Flex Cine Mat for approximately 2.4 hours. Feature…
-
-
-
CAD$471.90
- In den Warenkorb
G26CH
- Charges up to 4 Gold mount batteries at the same time Compatible with 26V batteries only AC Input Power 100 to 240 VAC, 50 / 60 Hz Operating Temperature: 32 to 104°F / 0 to 40°C 4-level LED power indicator
-
-
-
CAD$471.90
- In den Warenkorb
V26CH
- Charges up to 4 V-mount batteries at the same time Compatible with 26V batteries only AC Input Power 100 to 240 VAC, 50 / 60 Hz Operating Temperature: 32 to 104°F / 0 to 40°C 4-level LED power indicator
-
-
-
CAD$621.50
- In den Warenkorb
NDQTG
- Klemmhalterung für Tilta-Nucleus-M Wireless Verbindet Tilta Nucleus-M Wireless mit Rahmen der Shape Quick-Handles Ermöglicht volle Tilta Nucleus-M Wireless und Push-Button Funktionalität Zwei Antirotationspins halten die Handgriffe an ihrer derzeitigen Position Klemmhalterungenwerden mit jeweils einer 3/8-16 Schraube befestigt Arme kompatibel mit Arri Rosetten Push-Button System
-
-
-
CAD$42.90
- In den Warenkorb
NHCR
- Klemmhalterung für Tilta-Nucleus-M Wireless Verbindet Tilta Nucleus-M Wireless mit Rahmen der Shape Quick-Handles Ermöglicht volle Tilta Nucleus-M Wireless und Push-Button Funktionalität Zwei Antirotationspins halten die Handgriffe an ihrer derzeitigen Position Wird mit einer 3/8-16 Schraube befestigt
-
-
-
CAD$328.90
- In den Warenkorb
NTGRB
- Klemmhalterung für Tilta-Nucleus-M Wireless Verbindet Tilta Nucleus-M Wireless mit Quick-Handle 15mm Rod Bloc Ermöglicht volle Tilta Nucleus-M Wireless und Push-Button Funktionalität Zwei Antirotationspins halten die Handgriffe an ihrer derzeitigen Position Klemmhalterungenwerden mit jeweils einer 3/8-16 Schraube befestigt Push-Button System
-
-
-
-
CAD$27.50
- In den Warenkorb
H204K
- HDMI to HDMI male coiled 4k 2.0 cable 16 to 32" Die-Cast HDMI (Type-A) Connector 3840*2160/60Hz Data Speed: 18Gbps Supports 4K at 60 fps Coiled design reduces clutter
-
-
-
CAD$27.50
- In den Warenkorb
O204K
- HDMI to mini HDMI male coiled 4k 2.0 cable 16 to 32" Die-Cast HDMI (Type-D) Connector 3840*2160/60Hz Data Speed: 18Gbps Supports 4K at 60 fps Coiled design reduces clutter
-
-
-
CAD$27.50
- In den Warenkorb
M204K
- HDMI to mini HDMI male coiled 4k 2.0 cable 16 to 32" Die-Cast HDMI (Type-C) Connector 3840*2160/60Hz Data Speed: 18Gbps Supports 4K at 60 fps Coiled design reduces clutter
-
-
-
CAD$849.00
- In den Warenkorb
BP10
- Sliding Platte lässt sich nach vorne oder hinten schieben, um das Zubehör auszurichten Höhe des Rod Blocs lässt sich auf die optische Mitte der jeweiligen Kamera anpassen Rod Bloc auf der Vorder- und Rückseite für zusätzliches Zubehör Safety Pins und Flügelschrauben halten die Kamera fest an ihrer Position Weiches und ergonomisches Schulterpolster Inklusive Werkzeugkiste mit extra Schrauben und Inbusschlüssel
-
-
-
CAD$3,110.00
- In den Warenkorb
BP15
- Revolt VCT Universal Baseplate Sliding Platte lässt sich nach vorne oder hinten schieben, um das Zubehör auszurichten Höhe des Rod Blocs lässt sich auf die optische Mitte der jeweiligen Kamera anpassen Rod Bloc auf der Vorder- und Rückseite für zusätzliches Zubehör Safety Pins und Flügelschrauben halten die Kamera fest an ihrer Position Weiches und ergonomisches Schulterpolster Inklusive Werkzeugkiste mit extra…
-
-
-
CAD$1,998.89
- In den Warenkorb
BP12
- Revolt VCT Universal Baseplate Sliding Platte lässt sich nach vorne oder hinten schieben, um das Zubehör auszurichten Höhe des Rod Blocs lässt sich auf die optische Mitte der jeweiligen Kamera anpassen Rod Bloc auf der Vorder- und Rückseite für zusätzliches Zubehör Safety Pins und Flügelschrauben halten die Kamera fest an ihrer Position Weiches und ergonomisches Schulterpolster Inklusive Werkzeugkiste mit extra…
-
-
-
CAD$1,261.11
- In den Warenkorb
BPW14
- Revolt VCT Universal Baseplate Sliding Platte lässt sich nach vorne oder hinten schieben, um das Zubehör auszurichten Höhe des Rod Blocs lässt sich auf die optische Mitte der jeweiligen Kamera anpassen Rod Bloc auf der Vorder- und Rückseite für zusätzliches Zubehör Safety Pins und Flügelschrauben halten die Kamera fest an ihrer Position Weiches und ergonomisches Schulterpolster Inklusive Werkzeugkiste mit extra…
-
-
-
CAD$498.89
- In den Warenkorb
RSDR
- Vor und rückwärts verschiebbarer Schlitten mit Verschlusshebel ARRI Amira Dovetail kompatibel Auf das optische Zentrum der Kamera anpassbar 1/4 und 3/8 Zoll Gewinde an der Unterseite Integrierter Inbusschlüssel
-
-
-
CAD$276.67
- In den Warenkorb
RSB15
- Kamera kann schnell von der Schulter auf einem Stativ montiert werden ARRI Amira Dovetail kompatibel Sliding Riser ¼-20 und 3/8-16 Gewinde auf der Unterseite
-
-
-
CAD$658.90
- In den Warenkorb
HAND15
- Kompatibel mit ARRI Rosetten Quick-Release Handgriffe mit mehreren Gelenken Ergonomische Griffe mit Gummihandgriffen für mehr Stabilität und Präzision Bietet zwei ¼-20 und 2 3/8-16 Gewinde mit Verriegelungssystem Push-Button System
-
-
-
CAD$329.45
- Ausführung wählen
HAND2S
- Left or right handgrip with ARRI rosettes and black Push-button Arm features 3 points of articulation Patented Push-button technology Push, adjust, release, and then its lock Ergonomic handle with rubber handgrips for stability and precision Stainless steel locking mechanism for durability Designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers Made of CNC machined aluminum for…
-
-
-
CAD$548.90
- In den Warenkorb
BP20
- Leichtere Version (ohne Sliding Plate) der Revolt VCT Universal Baseplate (SHBP10) Zwei Rod Blocs können angebracht werden Zwei Standard Arri Rosetten für Handgriffe Quick-Release Adapterplatte kompatibel mit meisten VCT Stativplatten Bietet ¼-20 und 3/8-16 Gewinde Inklusive Paar 15mm 8" (SH15TUBE8) Rods, Paar 15mm 4" Rods (SH15TUBE4) und 3mm Inbusschlüssel
-
-
-
CAD$2,473.90
- In den Warenkorb
BP25
- Kompakte Revolt Schulterbaseplate Leichtere Version (ohne Sliding Plate) der Revolt VCT Universal Baseplate (SHBP10) Zwei Rod Blocs können angebracht werden Zwei Standard Arri Rosetten für Handgriffe Quick-Release Adapterplatte kompatibel mit meisten VCT Stativplatten Bietet ¼-20 und 3/8-16 Gewinde Inklusive Paar 15mm 8" (SH15TUBE8) Rods, Paar 15mm 4" Rods (SH15TUBE4) und 3mm Inbusschlüssel Follow Focus Kit Follow Focus Kit inklusive Follow…
-
-
-
CAD$1,098.90
- In den Warenkorb
BP22
- Kompakte Revolt Schulterbaseplate Leichtere Version (ohne Sliding Plate) der Revolt VCT Universal Baseplate (SHBP10) Zwei Rod Blocs können angebracht werden Zwei Standard Arri Rosetten für Handgriffe Quick-Release Adapterplatte kompatibel mit meisten VCT Stativplatten Bietet ¼-20 und 3/8-16 Gewinde Inklusive Paar 15mm 8" (SH15TUBE8) Rods, Paar 15mm 4" Rods (SH15TUBE4) und 3mm Inbusschlüssel Quick Handles Kompatibel mit ARRI Rosetten Quick-Release Handgriffe…
-
-
-
CAD$849.00
- In den Warenkorb
BP0008
- Sollte nur mit Kameras die einen externen Sucher haben verwendet werden Robustes und leichtes Kamera Supportsystem Für ARRI Standard Kameras mit ARRI Rosetten 15mm 20cm Rods auf der Vorderseite und 15mm 10cm Rods auf der Rückseite Kompatibel mit allen 15mm Rod Systemen und optional mit 15mm Studio oder 19mm Brackets V-Lock Deltaadapter auf der Unterseite der Baseplate Entfernbares Klettverschlusspolster Länge…
