Kostenlose Lieferung bei Einkäufen über 99$ nach Kanada und in die Vereinigten Staaten von Amerika
-
-
-
USD$225.00
- In den Warenkorb
A7S3CAGE
- For Sony Alpha a7S III camera Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage
-
-
-
USD$299.00
- In den Warenkorb
A7S3THC
- For Sony Alpha a7S III camera Top handle made of CNC Aluminum Top handle designed with multiple mounting options Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage
-
-
-
USD$549.00
- In den Warenkorb
A7S3ROD
- For Sony Alpha a7S III camera Wooden Push-Button Top Handle compatible Audio Unit Push, adjust, release, and then its locked. Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage Quick Release Rod Base System Delta plate included to be mounted on the quick release ARRI rosette included to mount…
-
-
-
USD$789.00
- In den Warenkorb
A7S3SM
- For Sony Alpha a7S III camera Wooden Push-Button Top Handle compatible with audio unit Quick Handle Rod Bloc with Push-button Push, adjust, release, and then its locked Mini Composite shoulder pad & back Pad Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage Quick Release Rod Base System 1…
-
-
-
USD$849.00
- In den Warenkorb
A7S3OF
- For Sony Alpha a7S III camera Wooden Push-Button Top Handle compatible with audio unit Offset Rail Rod Bloc 10” & 12” 15 mm Rods Quick Handle Rod Bloc with Push-button Push, adjust, release, and then its locked Mini Composite shoulder pad & back Pad Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while…
-
-
-
USD$1,299.00
- In den Warenkorb
A7S3KIT
- For Sony Alpha a7S III camera Wooden Push-Button Top Handle compatible with audio unit Push, adjust, release, and then its locked SHAPE kit focus single rod follow focus 15 mm LWs 2-Stage 4 x 5.6″ matte box Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage Quick Release Rod…
-
-
-
USD$1,599.00
- In den Warenkorb
A7S3SMKIT
- For Sony Alpha a7S III camera Wooden Push-Button Top Handle compatible with audio unit Quick Handle Rod Bloc with Push-button Push, adjust, release, and then its locked Mini Composite shoulder pad & back Pad SHAPE kit focus single rod follow focus 15 mm LWs 2-Stage 4 x 5.6″ matte box Formfitting Design cage with multiple mounting options Strap hooks can…
-
-
-
USD$1,599.00
- In den Warenkorb
A74SMKIT
- For Sony Alpha a7R IV camera Wooden Push-Button Top Handle compatible with audio unit Quick Handle Rod Bloc with Push-button Push, adjust, release, and then its locked Mini Composite shoulder pad & back Pad SHAPE kit focus single rod follow focus 15 mm LWs 2-Stage 4 x 5.6″ matte box Formfitting Design cage with multiple mounting options Strap hooks can…
-
-
-
USD$1,299.00
- In den Warenkorb
A74KIT
- For Sony Alpha a7R IV camera Wooden Push-Button Top Handle compatible with audio unit Push, adjust, release, and then its locked SHAPE kit focus single rod follow focus 15 mm LWs 2-Stage 4 x 5.6″ matte box Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage Quick Release Rod…
-
-
-
USD$849.00
- In den Warenkorb
A74OF
- For Sony Alpha a7R IV camera Wooden Push-Button Top Handle compatible with audio unit Offset Rail Rod Bloc 10” & 12” 15 mm Rods Quick Handle Rod Bloc with Push-button Push, adjust, release, and then its locked Mini Composite shoulder pad & back Pad Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while…
-
-
-
USD$789.00
- In den Warenkorb
A74SM
- For Sony Alpha a7R IV camera Wooden Push-Button Top Handle compatible with audio unit Quick Handle Rod Bloc with Push-button Push, adjust, release, and then its locked Mini Composite shoulder pad & back Pad Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage Quick Release Rod Base System 1…
-
-
-
USD$549.00
- In den Warenkorb
A74ROD
- For Sony Alpha a7R IV camera Wooden Push-Button Top Handle compatible Audio Unit Push, adjust, release, and then its locked. Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage Quick Release Rod Base System Delta plate included to be mounted on the quick release ARRI rosette included to mount…
-
-
-
USD$299.00
- In den Warenkorb
A74THC
- For Sony Alpha a7R IV camera Top handle made of CNC Aluminum Top handle designed with multiple mounting options Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage
-
-
-
USD$225.00
- In den Warenkorb
A74CAGE
- For Sony Alpha a7R IV camera Formfitting Design cage with multiple mounting options Strap hooks can remain attached to the camera while inserted in the cage
-
-
-
USD$2,999.00
- In den Warenkorb
FX9KIT
- Complete solution for Sony FX9 Form fitting top, side and bottom plates connecting together to protect the camera Featuring (1) Arri rosette mount and several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the native Sony FX9 handle Rear insert plate with 3/8-16 and ¼-20 threaded holes give you more surface to strongly mount the FX9 to your…
-
-
-
USD$1,999.00
- In den Warenkorb
FX9BRFFP
- Compatible with Sony FX9 Formfitting cage with Arri rosette and mounting options Baseplate with Arri rosette, shoulder mount and 15 mm rod system Left handle with Arri rosette and Push-Button Technology Follow Focus pro
-
-
-
USD$1,049.00
- In den Warenkorb
FX9BR
- Compatible with Sony FX9 Formfitting cage with Arri rosette and mounting options Baseplate with Arri rosette, shoulder mount and 15 mm rod system Left handle with Arri rosette and Push-Button Technology
-
-
-
USD$949.00
- In den Warenkorb
FX9BT
- Compatible with Sony FX9 Baseplate with Arri rosette, shoulder mount and 15 mm rod system Top plate with several threaded holes Left handle with Arri rosette and Push-Button Technology Made of CNC aluminum
-
-
-
USD$649.00
- In den Warenkorb
FX9SM
- Compatible with Sony FX9 Quick release baseplate with 15 mm rods 18″ Quick release handgrips with Push-button and 15 mm rod bloc Shoulder pad and back pad, padded for superior comfort
-
-
-
USD$549.00
- In den Warenkorb
FX9BP
- Match Sony FX9 optical center Bracket system with magnet let you swivel the baseplate Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob Come with 2 pairs of 15 mm rods (8”, 4”) Designed with 2 standard Arri rosettes for handles mount Comfortable shoulder pad made of slip-free material Sophisticated…
-
-
-
USD$799.00
- In den Warenkorb
FX9EVFC
- Compatible with the Sony FX9 Top plate compatible with the native Sony FX9 handle Top handle with viewfinder rod clamp with 19mm push-button Form fitting top, side and bottom plates with threaded holes Arri rosette mount Baseplate with 15mm 12'' rods Made of CNC aluminum
-
-
-
USD$499.00
- In den Warenkorb
FX9THC
- Compatible with the Sony FX9 Formfitting cage with Arri rosette and mounting options Top handle with multiple mounting options Made of CNC aluminum
-
-
-
USD$299.00
- In den Warenkorb
FX9CAGE
- Form fitting top, side and bottom plates Arri rosette mount on the side plate Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the native Sony FX9 handle Made of CNC aluminum
-
-
-
USD$199.00
- In den Warenkorb
B15FX9
- Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws Mounting holes for securing the camera or a tripod plate Ratchet key knobs to reposition the Rod Bloc system Four rubber pads at the top of the base protect and securely hold your Sony FX9 camera Made of CNC aluminum
-
-
-
USD$99.00
- In den Warenkorb
FX9TP
- Fits Around the Sony FX9 top handle Thin, lightweight, made of CNC aluminum Multiple 1/4-20 & 3/8-16 threaded holes with anti-rotating holes Designed with a threaded hole to insert your FX9 sensor pin Designed with a threaded hole to insert your FX9 viewfinder cable clamp
-
-
-
USD$49.00
- In den Warenkorb
FX9AHP
- Adapter plate designed to fit the Sony FX9 top plate Designed with (18) ¼-20 threaded holes for mounting options Thin, lightweight, made of CNC aluminum
-
-
-
USD$59.00
- In den Warenkorb
FX9RIP
- Compatible with the SONY FX9 Supports the Rear of the camera body Includes (3) M4 mounting Screws Large surface of the plate gives additional support on tripod mount Made of CNC aluminum
-
-
-
USD$199.00
- In den Warenkorb
FX9VF
- Sony FX9 view finder clamp with 15mm rod Viewfinder rod clamp with 19mm push-button Compatible with the Sony FX9 native handle 2 Points of Articulation for horizontal and vertical Adjustment SHAPE Patented Push-Button technology Made of CNC aluminum
-
-
-
USD$249.00
- In den Warenkorb
FX9RH
- Compatible with Sony FX9 Easy to install and adjust Designed with Arri rosettes to mount on the camera or baseplate Push-Button system with 360-degree rotation for several positioning options Push, adjust, release, and then its lock Made of CNC machined aluminum
-
-
-
USD$59.00
- In den Warenkorb
SCCRH
- Cable clamp for Sony FX9 remote handle CNC machined aluminium clamp designed to replace the original plastic locking system Designed to prevent cable pulls or disconnects Inside of the clamp is padded with rubber to prevent any damage of the cable
-
-
-
USD$395.00
- In den Warenkorb
VPBFX
- Attaches to the Rear of the Sony FX9 Camera Supports V-Mount Battery Access to BP-U Battery Allows Hot Swaps Swivel system let you pivot the battery plate horizontally Magnetic system to open and to close the back plate (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for Sony FX9 (15’’) Multiple holes on top and side of…
-
-
-
USD$395.00
- In den Warenkorb
GPBFX
- Attaches to the Rear of the Sony FX9 Camera Attaches to the Rear of the Sony FX9 Camera Supports Gold Mount Battery Access to BP-U Battery Allows Hot Swaps Swivel system let you pivot the battery plate horizontally Magnetic system to open and to close the back plate (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for…
-
-
-
USD$99.00
- In den Warenkorb
FX9PC
- D-Tap Power Cable for Sony FX9 Regulates the voltage to power an FX9 camera (19.5V) Allows you to power your camera using any V-mount or Gold mount battery Cable has a total end-to-end length of 15" (38 cm) Connector 1: 1 x D-Tap Connector 2: 1 x DC Barrel Converts 14.4 volt to 19.5 volt required to power the Sony…
-
-
-
USD$499.00
- In den Warenkorb
CTRL
- Modular top handle made of CNC aluminum and Canadian maple wood Perfect to attach more camera accessories Let you place the handgrip in the up, side and down positions Top handle also features several 3/8-16 anti rotating threaded holes The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear…
-
-
-
USD$269.00
- In den Warenkorb
TPST
- Modular Top handle with multiple threaded holes Perfect to attach more camera accessories The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear and oxidation Made of CNC aluminum
-
-
-
USD$189.00
- In den Warenkorb
LPHT
- Top handle with multiple threaded holes Perfect to attach more camera accessories The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear and oxidation Made of CNC aluminum
-
-
-
USD$449.00
- In den Warenkorb
BXA73
- Kompatibel mit Sony A7 III, A7R III, FX3 Der Akku kann gleichzeitig geladen und verwendet werden Über das Netzteil kann das Rig direkt mit Strom versorgt werden (ohne Akku) Liefert bis zu 100W Strom V-Mount Batterieplatte Sechs Outputs: D-Tap, 5/8/13/16,8V Ports, USB 5V Inklusive 15mm Rod Halterung
-
-
-
USD$659.00
- In den Warenkorb
KBFX9
- J-Box Power Distribution Plate D-Tap Power Cable Converts 14.4 volt to 19.5 volt required to power the Sony FX9 Lightweight battery plate and rod bracket (1.1 lbs; 0.45 kg) 5, 8, 12, 16.8V, and USB Power Outlets Power from Battery or AC Power Adapter Built-In V-Mount with Safe Lock on J-Box 15 mm Rod Clamp Included Can Attach Directly to…
-
-
-
USD$459.00
- In den Warenkorb
BXFX9
- J-Box Power & Charger with V-Mount D-Tap Power Cable Converts 14.4 volt to 19.5 volt required to power the Sony FX9 Lightweight battery plate and rod bracket (1.1 lbs; 0.45 kg) For Sony FX9 20, 40, 60, 100W & 5V USB Outputs Supports up to 100W Power Consumption AC Power Supply & Cable LED Indicators 15 mm Rod Mount &…
-
-
-
USD$649.00
- In den Warenkorb
KBA73
- D-Box Netzteil und Ladegerät mit V-Mount für die Sony A7R3 und A73 Serie Kompatibel mit Sony A7 III, A7R III, FX3 Der Akku kann gleichzeitig geladen und verwendet werden Über das Netzteil kann das Rig direkt mit Strom versorgt werden (ohne Akku) Liefert bis zu 100W Strom V-Mount Batterieplatte Sechs Outputs: D-Tap, 5/8/13/16,8V Ports, USB 5V Inklusive 15mm Rod Halterung…
-
-
-
USD$4,799.00
- In den Warenkorb
VNKIT
- Revolt VCT BP10 Universal Baseplate Sliding Platte lässt sich nach vorne oder hinten schieben, um das Zubehör auszurichten Höhe des Rod Blocs lässt sich auf die optische Mitte der jeweiligen Kamera anpassen Rod Bloc auf der Vorder- und Rückseite für zusätzliches Zubehör Safety Pins und Flügelschrauben halten die Kamera fest an ihrer Position Weiches und ergonomisches Schulterpolster Inklusive Werkzeugkiste mit…
-
-
-
USD$2,949.00
- In den Warenkorb
VNPRO
- Revolt VCT BP10 Universal Baseplate Sliding Platte lässt sich nach vorne oder hinten schieben, um das Zubehör auszurichten Höhe des Rod Blocs lässt sich auf die optische Mitte der jeweiligen Kamera anpassen Rod Bloc auf der Vorder- und Rückseite für zusätzliches Zubehör Safety Pins und Flügelschrauben halten die Kamera fest an ihrer Position Weiches und ergonomisches Schulterpolster Inklusive Werkzeugkiste mit…
-
-
-
USD$2,379.00
- In den Warenkorb
VNBP
- Revolt VCT BP10 Universal Baseplate Sliding Platte lässt sich nach vorne oder hinten schieben, um das Zubehör auszurichten Höhe des Rod Blocs lässt sich auf die optische Mitte der jeweiligen Kamera anpassen Rod Bloc auf der Vorder- und Rückseite für zusätzliches Zubehör Safety Pins und Flügelschrauben halten die Kamera fest an ihrer Position Weiches und ergonomisches Schulterpolster Inklusive Werkzeugkiste mit…
-
-
-
USD$949.00
- In den Warenkorb
VN15D
- ARRI Standard 12" Sliding Dovetail Plate Balanciert selbst schweres Kamera Equipment aus Eine einfach zu erreichende Sicherheitsschraube und eine Sicherheitsverriegelung Mehrere ¼" und 3/8" Gewinde für die Anbringung auf Stativplatten 15mm Studio ARRI Standard Bridge Plate 15mm Studio Bridge Plate aus leichtem und robustem Aluminium 15mm Studio Offset Spacing (Rods haben einen Abstand von 100mm vom Zentrum zum Zentrum) Praktische…
-
-
-
USD$969.00
- In den Warenkorb
VN19D
- ARRI Standard 12" Sliding Dovetail Plate Balanciert selbst schweres Kamera Equipment aus Eine einfach zu erreichende Sicherheitsschraube und eine Sicherheitsverriegelung Mehrere ¼" und 3/8" Gewinde für die Anbringung auf Stativplatten 19mm Studio ARRI Standard Bridge Plate 19mm Studio Bridge Plate aus leichtem und robustem Aluminium 19mm Studio Offset Spacing (Rods haben einen Abstand von 104mm vom Zentrum zum Zentrum) Praktische…
-
-
-
USD$599.00
- In den Warenkorb
VNTP
- Top Handle für Sony Venice Ergonomischer Handgriff aus Holz Geschlossener Griff für felsenfesten Halt Speziell entworfen für Rig und Stativkonfigurationen Cheese Top Rail bietet mehrere ARRI Standard UNC Anti-Rotationsgewinde (1/4" und 3/8") 1x 19mm Studio Rod Klammer für die Top Plate (SH19CTH) Rod Klammer kann entweder parallel oder aufrecht platziert werden auf dem Cheese Rail Cheese Rail lässt sich an…
-
-
-
USD$299.00
- In den Warenkorb
VNT15
- Kompatibel mit dem originalen Sony Venice Top Handle Einfache Positionierung der 15mm und 19mm Rods Zwei Klettverschluss-Schlaufen für Kabelmanagement Vier ¼" UNC Inbusschrauben Mehrere 3/8" UNC Gewinde mit ARRI Anti-Rotationssystem Praktische Werkzeugkiste mit magnetischer Inbusschlüssel CNC gefrästes Aluminium mit eloxierter Beschichtung
-
-
-
USD$1,900.00
- In den Warenkorb
FS72FFP
- Beinhaltet die SHAPE FS7M2 V-Lock Quick Release Baseplate VCT Platten kompatibel Beinhaltet ein Paar 15mm 8" und 15mm 4" Silberrods Bietet ¼" und 3/8" Gewinde für die Anbringung von Zubehör Beinhaltet einen Teleskopdoppelhandgriff mit ARRI Rosetten (SHHAND3) Beinhaltet die FS7 Top Plate und die FS7 Rear Insert Plate Bietet eine ausbalancierte Lösung direkt auf der Schulter 2 Höhenstufenanpassungen der Rods…
-
-
-
USD$1,100.00
- In den Warenkorb
FS72BT
- Beinhaltet die SHAPE FS7M2 V-Lock Quick Release Baseplate VCT Platten kompatibel Beinhaltet ein Paar 15mm 8" und 15mm 4" Silberrods Bietet ¼" und 3/8" Gewinde für die Anbringung von Zubehör Beinhaltet einen Teleskopdoppelhandgriff mit ARRI Rosetten (SHHAND3) Beinhaltet die FS7 Top Plate und die FS7 Rear Insert Plate Bietet eine ausbalancierte Lösung direkt auf der Schulter 2 Höhenstufenanpassungen der Rods…
-
-
-
USD$489.00
- In den Warenkorb
FS72BP
- Diese Baseplate sollte mit Kameras, die einen externen Viewfinder haben, benutzt werden Beinhaltet auch die SHAPE Sony FS7 Rear Insert Plate ¼" und 3/8" Gewinde um ihr Zubehör zu befestigen Eine Griffschraube um beide Rods zu sichern Robustes und leichtes Kameraunterstützungssystem ARRI Standard Rosetten 15mm (8") Rods auf der Vorderseite und 15mm (4") Rods auf der Rückseite BP Bloc kann…
