Free Shipping to Canada & US on orders over $99
View cart “SHAPE monitor accessory mounting clamp for 25 mm gimbal rod” has been added to your cart.
-
-
-
CAD$361.79
- Add to cart
CPGRD
- Compatible with RED Epic, Dragon or Raven Series. Cable Length 10" / 25 cm Connector Type Camera: 1 x Push-Pull Connector Plug, 6 pin 1B Other: 1 x P-Tap Fuse 10 A
-
-
-
CAD$275.00
- Add to cart
2GMSB
- Mount to Atomos Sumo Dual-Battery Plate (2) plates with (1) D-Tap on each plate D-Tap to 4-Pin XLR Power Cables Use with Gold Mount Batteries (Bat Wing plate is not included in our product. It's only included with the Atomos Sumo package.)
-
-
-
CAD$276.00
- Add to cart
2VMAB
- (2) V-Mount Battery Plate Mount to Atomos Sumo Dual-Battery Plate 2 x D-Tap to 4-Pin XLR Power Cables Use with V-Mount Batteries (Bat Wing plate is not included in our product. It's only included with the Atomos Sumo package.)
-
-
-
CAD$88.00
- Add to cart
UMPL
- DC Connection for Cameras or Accessories 1 x D-Tap Output Port 12-17V, 50W Maximum Output
-
-
-
CAD$133.00
- Add to cart
UMPBU
- Enables you to power your Blackmagic URSA camera DC Connection to Camera Provides Camera-Specific Voltage 1 x D-Tap Accessory Port Breakaway DC Cable Included Uses Longer Lasting V-Mount Batteries
-
-
-
CAD$217.00
- Add to cart
UMPCII
- DC Connection to Camera Provides Camera-Specific Voltage 1 x D-Tap Accessory Port Breakaway DC Cable Included Uses Longer Lasting V-Mount Batteries
-
-
-
CAD$183.00
- Add to cart
UMPC1
- DC Connection to Camera Provides Camera-Specific Voltage 1 x D-Tap Accessory Port Breakaway DC Cable Included Uses Longer Lasting V-Mount Batteries
-
-
-
CAD$301.29
- Add to cart
ALEXGM
- Regulated Gold Mount battery plate. Cable length: 10" / 25 cm. Connector type camera 1 x LEMO 8-pin. Other 1 x P-tap. Fuse 10A.
-
-
-
CAD$301.29
- Add to cart
ALEXVM
- Regulated V-mount battery plate. Cable Length 10" / 25 cm. Connector Type Camera: 1 x LEMO, 8-pin. Other: 1 x P-Tap. Fuse 10 A.
-
-
-
CAD$277.09
- Add to cart
REDGM
- Compatible with RED Epic, Dragon or Raven Series. Regulated battery plate. Cable Length 10" / 25 cm. Connector Type Camera: 1 x Push-Pull Connector Plug, 6 pin 1B. Other: 1 x P-Tap. Fuse 10 A.
-
-
-
CAD$77.00
- Add to cart
ABGL
- DC Connection for Cameras or Accessories 1 x D-Tap Output Port 11-17V, 50W Maximum Output
-
-
-
CAD$69.00
- Add to cart
GBLPTS
- Includes (2) 1800mAh LP-E6 Batteries Includes (2) 100-240VAC Chargers Voltage for Worldwide Use
-
-
-
CAD$273.90
- Add to cart
BHDL
- kit of 12 cables (BNC, LANC, DTAP, HDMI) Unique 2-sided pouch with lots of storage Deep side and shallow organizer side Durable elastic loops keep cables untangled without the need for individual cord wraps Deep side has short, quick access zipper at the top Shallow side has a zip-around flap for easier access
-
-
-
CAD$273.90
- Add to cart
BNKI
- Kit of 12 skinny 90-degree BNC cables Unique 2-sided pouch with lots of storage Deep side and shallow organizer side Durable elastic loops keep cables untangled without the need for individual cord wraps Deep side has short, quick access zipper at the top Shallow side has a zip-around flap for easier access
-
-
-
CAD$27.50
- Add to cart
TSOCP
- Unique 2-sided pouch with lots of storage Deep side for chargers, adapters and lavalier microphones Shallow organizer side for cables and smaller items Durable elastic loops keep cables untangled without the need for individual cord wraps Deep side has short, quick access zipper at the top Cable side has a zip-around flap for easier access
-
-
-
CAD$20.90
- Add to cart
SKI6R
- Color: Red Length: 6’’ (15.24 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$42.90
- Add to cart
MICMO
- Hold almost any microphone with a diameter sized 19-30 mm (0.75-1.2") Brand new and high-quality Fit for handheld microphone
-
-
-
CAD$20.90
- Add to cart
SKI6B
- Color: Blue Length: 6’’ (15.24 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$20.90
- Add to cart
SKI6G
- Color: Green Length: 6’’ (15.24 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$20.90
- Add to cart
SKI6N
- Color: Black Length: 6’’ (15.24 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$22.00
- Add to cart
SKI12R
- Color: Red Length: 12’’ (30.48 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$22.00
- Add to cart
SKI12B
- Color: Blue Length: 12’’ (30.48 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$22.00
- Add to cart
SKI12G
- Color: Green Length: 12’’ (30.48 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$22.00
- Add to cart
SKI12N
- Color: Black Length: 12’’ (30.48 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$24.20
- Add to cart
SKI24R
- Color: Red Length: 24’’ (60.96 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$24.20
- Add to cart
SKI24B
- Color: Blue Length: 24’’ (60.96 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$24.20
- Add to cart
SKI24G
- Color: Green Length: 24’’ (60.96 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$24.20
- Add to cart
SKI24N
- Color: Black Length: 24’’ (60.96 cm) Thin Gauge Outer Diameter: 2.5 mm 90-degree Male BNC, 90-degree Male BNC Impedance: 75 ohms Frequency: DC to 1 GHz VSWR (Voltage Standing Wave Ratio): 1.2 MAX Connect SDI equipment’s 3G-SDI rated cable
-
-
-
CAD$37.40
- Add to cart
SH10BN
- Right Angle BNC Male to Male Connectors Ridged Grip Connectors Extends to 2.5 ft
-
-
-
CAD$53.90
- Add to cart
SH20BN
- Right Angle BNC Male to Male Connectors Ridged Grip Connectors Extends to 4 ft
-
-
-
CAD$49.00
- Add to cart
D-TAP20
- 20'' coiled cable, Max length: 2,5 ft (76 cm) D-Tap male to D-Tap male To connect the BPU battery to an external power source Standard Anton Bauer & IDX D-Tap power outputs
-
-
-
CAD$53.90
- Add to cart
DTXLC
- 18" when contracted and 48" fully extended; Connect D-Tap Sources to Your Device; D-Tap to 4-Pin XLR Female Connectivity; Input: 11 - 28 VDC Output: Unregulated Connector 1: P-Tap Connector 2: 4-pin XLR female Also compatible with C500M2
-
-
-
CAD$108.90
- Add to cart
EVAPC
- Power Camera Using a D-Tap Battery 22" Cable Length Converts 12 to 18 V to Regulated 12 V Input Voltage 12 to 18 VDC Output Voltage 12 VDC Max Current Draw 3 A Regulator: 1.5" (3.8 cm) Can be combined with CP33 Anton or CP33 IDX.
-
-
-
CAD$54.44
- Add to cart
SDSC
- Four female D-TAP receptacles Splitter Cable to accommodate 4 separate devices Perfect for powering multiple wireless receivers
-
-
-
CAD$39.00
- Add to cart
USBD
- D-Tap Adapter to D-Tap 5V USB Lets you charge your mobile phones or other USB devices via a Gold Mount or V-Mount camera battery
-
-
-
CAD$30.00
- Add to cart
LANCCO10
- Plug SHAPE remote extension handle LANC 2.5 mm Male Right Angle Connector LANC 2.5 mm Female Connector 10" Long End-to-End Coiled Approx. 20" Long Extended
-
-
-
CAD$25.00
- Add to cart
LANCCO11
- Plug SHAPE Extension Handle to Ursa Mini LANC 2.5 mm Male Connectors 11" Long End-to-End Coiled Approx. 20" Long Extended Works with Other Cameras with LANC Male
-
-
-
CAD$361.90
- Add to cart
VCTSH
- Made of CNC aluminum Quickly mount and dismount your camcorder from a tripod Quick-release latch to unlock the baseplate from the VCT plate 1/4"-20, 3/8"-16 threaded holes underneath to attach tripod quick-release plates
-
-
-
CAD$196.90
- Add to cart
DELTAQUICK
- V-Lock Quick Release Plate & Adapter Mount Any Camera to Any Support Platform Adjustable/Removable Camera Stoppers Supports Loads Up to 50 lb
-
-
-
CAD$130.90
- Add to cart
QUICK
- CNC machined, solid aluminum bloc Stable and easy to use Locking system prevents from accidental and unwanted camera release. Can hold a camera up to 50 pounds 2 x 3/8'' -16 and 1 x 1/4-20 threaded attachments
-
-
-
CAD$75.90
- Add to cart
MBR25
- 25 mm Rod Clamp Mounts Accessory on Gimbal 1 x 1/4"-20 Captive Screw 1 x Cold Shoe Mount 1/4-20, 3/8-16 Arri anti rotating threads Thumb-Lever Fastener Aluminum Construction Lightweight (0.06 kg) Ratchet knob to prevent accessories from sliding forward
-
-
-
CAD$75.90
- Add to cart
MBR30
- 30 mm Rod Clamp Mounts Accessory on Gimbal 1 x 1/4"-20 Captive Screw 1 x Cold Shoe Mount 1/4-20, 3/8-16 Arri anti rotating threads Thumb-Lever Fastener Aluminum Construction Lightweight (0.07 kg) Ratchet knob to prevent accessories from sliding forward
-
-
-
CAD$1,043.90
- Add to cart
VN15D
- ARRI-Standard Dovetail Bridgeplate Correct Optical Axis for VENICE Sliding Camera Plate Compatible with 15 mm Studio Accessories Pair of 15 mm 12" rods with 100 mm spacing 12'' Dovetail
-
-
-
CAD$1,065.90
- Add to cart
VN19D
- ARRI-Standard Dovetail Bridgeplate Correct Optical Axis for VENICE Sliding Camera Plate Compatible with 19 mm Studio Accessories Pair of 19 mm 12″rods with 104 mm spacing 12'' Dovetail
-
-
-
CAD$658.90
- Add to cart
VNTP
- Ergonomic Top Wooden Handgrip Closed Handle for Rock-Solid Grip Specifically designed for Rig and Tripod Configurations Cheese Top Rail providing several ARRI Standard Anti-Rotating 1/4″-20 and 3/8″-16 UNC Threaded Holes (1) 19 mm Studio Rod Clamp for Top Plate 19CTH Rod Clamp can be installed on Parallel or Perpendicular Orientation at both ends of Cheese Rail Cheese Rail attaches in…
-
-
-
CAD$328.90
- Add to cart
VNT15
- Compatible with the original Sony Venice Camera Top Handle Easy positioning of 15 mm and 19 mm rods to set the accessories at the proper height with respect to the Sony Venice camera optical center (2) Two Velcro strap attachment slots for cable management (4) Four 1/4″-20 UNC Socket Head Cap Screws Several 3/8″-16 UNC Threaded Mounting Holes with ARRI…
-
-
-
CAD$2,111.11
- Add to cart
FS72FFP
- Compatible with Sony FS7M2 Made of CNC Machined Aluminum Top plate (cheeseplate style) Telescoping Arri Rosette Handle (left side) Follow focus pro Baseplate designed to be shoulder or tripod mounted Compatible with 15 mm lightweight and (15 or 19) mm LWS brackets Let you adjust your rod height bloc to match your camera’s optical center Protective rubber pads to protect…
-
-
-
CAD$1,222.22
- Add to cart
FS72BT
- Compatible with Sony FS7M2 Made of CNC Machined Aluminum Top plate (cheeseplate style) Telescoping Arri Rosette Handle (left side) Baseplate designed to be shoulder or tripod mounted Compatible with 15 mm lightweight and (15 or 19) mm LWS brackets Let you adjust your rod height bloc to match your camera’s optical center Protective rubber pads to protect your camera Designed…
-
-
-
CAD$543.33
- Add to cart
FS72BP
- Compatible with Sony FS7M2 Made of CNC Machined Aluminum Design to be shoulder or tripod mounted Compatible with 15 mm lightweight and (15 or 19) mm LWS brackets Let you adjust your rod height bloc to match your camera’s optical center Protective rubber pads to protect your camera Designed with 2 standard Arri rosettes for handles mount Designed with 3…
-
-
-
CAD$276.67
- Add to cart
RHV2
- Compatible with Sony FS7M2 only Easy to install and adjust Knob screw to adjust the length (5 cm, 2 inches) Designed with Arri rosettes to mount on the camera or baseplate Push-Button system with 360-degree rotation for several positioning options Push, adjust, release, and then its lock Made of CNC machined aluminum