Envío gratis por todo Canadá y Estados Unidos en pedidos superiores a $99,00
-
-
-
CAD$306.90
- Añadir al carrito
V99MB
- 99 Wh Lithium-Ion battery Safe for air travel LCD Battery Capacity Gauge 2 x P-tap 14.4V and 2 x USB (5V,2A) accessory ports Supports up to 10A Continuous draw
-
-
-
CAD$548.90
- Añadir al carrito
AKSCL
- Lightweight and compact design Two 4 x 5.6 filter trays (one rotary) Removable silicone shade box 5 x removable rings and carbon fiber french flag
-
-
-
CAD$746.90
- Añadir al carrito
AKSWA
- Lightweight and compact design Removable silicone shade box Swing-away system 15mm LWS rod bracket Two 4x5.6 filter trays (one rotary) Three different configurations in one kit. (Swing-away, straight, clip on) 6 removable adapter rings and carbon fiber French flag
-
-
-
CAD$163.90
- Añadir al carrito
SPBR
- Patented Push-button system with Arri rosette mount and indexable key
-
-
-
-
CAD$39.05
- Añadir al carrito
ALU4
- Indexable key for handle arm Spring-loaded locking levers lock your camera handle in place
-
-
-
-
CAD$185.90
- Añadir al carrito
MDTVM
- Made of CNC aluminum Four built-in P-tap ports (14.4V – 10A max) Regulated D-tap connectors Fits on 15mm LWS rods One knob tightening Dimensions: 3.6 x 4.7 x 1.5 “ / 91.5 x 120 x 40 mm Weight: 0.5 lbs / 247 g
-
-
-
CAD$97.90
- Añadir al carrito
SBTK
- Designed for camera assistants, grips, and techs. Made of durable nylon. Includes quick-release buckle, MOLLE webbing, and an accessory pouch. The belt is adjustable from 91 to 121 cm (36 to 48 in.).
-
-
-
CAD$308.00
- Añadir al carrito
TBAG
- Wheeled carry-on with hidden backpack straps and a chest strap (22 x 14 x 9 inches). Hook-and-loop “A” accent on front MOLLE webbing on each side of bag. Mesh-lined water bottle pouch. Side handle Padded laptop compartment suspends your device to protect from impact. YKK waterproof main zip Soft strap in center of back for easy grab Sturdy top handles…
-
-
-
CAD$86.90
- Añadir al carrito
12G24
- High-quality 90-degree Male BNC to 90-degree Male BNC black cable; Designed to record/transfer video signals of both serial data and 12G 4K ProRes raw; Compatible with HD cameras, gimbals, monitors, EVF, antennas, SDI Wireless TX/RX set or other equipment’s with Serial Digital Interface (SDI); Length: 24’’ (60.96 cm) Thin Gauge Outer Diameter: 0.159 in Impedance: 75 ohms Frequency: DC to…
-
-
-
CAD$108.90
- Añadir al carrito
PMPW
- Attaches to Camera top plate or side plates. Supports Mic Receivers/Other Accessories CNC Lightweight anodise aluminum ¼-20 camera screw and 3/8 to ¼ reducer Anti-slip hook and loop buckle strap
-
-
-
CAD$2,858.90
- Añadir al carrito
C70KIT
- Form fitting top, side, and bottom plates L-shaped top handle with Push-Button Technology Aluminum and Canadian maple top handle with a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Multiple left-hand (CCW) threaded holes (3/8-16, ¼-20) Top plate compatible with the factory CANON C70 handle CNC machined aluminum. Mounting holes for securing…
-
-
-
CAD$1,248.50
- Añadir al carrito
C70BR
- Form fitting top, side and bottom plates L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle features a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Canon C70 handle Made…
-
-
-
CAD$713.90
- Añadir al carrito
C70SM
- Designed to match the Canon C70 optical center Comes with an adapter plate Comes with (1 pair) 15 mm 18″ rods Mounting holes for securing the camera to a tripod plate Ratchet key knobs to secure rods Rubber pads at the top of the base to protect your CANON C70 Integrated HDMI Cable Clamp Made of CNC aluminum
-
-
-
CAD$603.90
- Añadir al carrito
C70THC
- Form fitting top, side and bottom plates L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle features a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory CANON C70 handle Made…
-
-
-
CAD$504.90
- Añadir al carrito
C70ROD
- Form fitting top, side and bottom plates Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory CANON C70 handle Made of CNC lightweight aluminum Mounting holes for securing the camera to a tripod plate Rubber pads at the top of the base to protect your CANON C70 Comes with (1 pair) 15 mm 12″ rods Ratchet…
-
-
-
CAD$361.90
- Añadir al carrito
C70CAGE
- Form fitting top, side and bottom plates Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Canon C70 handle Made of CNC lightweight aluminum Mounting holes for securing the camera to a tripod plate Rubber pads at the top of the base to protect your Canon C70
-
-
-
CAD$218.90
- Añadir al carrito
B15C70
- Designed to match the Canon C70 optical center Comes with an adapter plate Comes with (1 pair) 15 mm 12″ rods Mounting holes for securing the camera to a tripod plate Ratchet key knobs to secure rods Rubber pads at the top of the base to protect your CANON C70 Integrated HDMI Cable Clamp Made of CNC aluminum
-
-
-
CAD$108.90
- Añadir al carrito
C70TP
- Fits on your Canon C70 Multiple ¼”-20 screw holes along the top and sides Multiple ⅜”-16 screw holes with ARRI standard accessory mounts Canon Accessory Mounts stainless steel shoe in the center of top plate Cold Shoe offset for microphones, lights, etc. Lightweight and made of CNC aluminum
-
-
-
CAD$328.90
- Añadir al carrito
GBC70
- Gold-Mount pivoting battery plate compatible with CANON C70 top plate (C70TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector and allows Battery hot swap feature (Please refer to the camera’s operating manual for proper usage) Supports Gold-Mount Battery (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for…
-
-
-
CAD$328.90
- Añadir al carrito
VBC70
- V-Mount pivoting battery plate compatible with CANON C70 top plate (C70TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector and allows Battery hot swap feature (Please refer to the camera’s operating manual for proper usage) Supports V-Mount Battery (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for…
-
-
-
CAD$31.90
- Añadir al carrito
C70PC
- Power CANON C70 from D-Tap Power Source Coiled D-Tap to DC 5.5 x 2.5 mm Barrel Cable Use with V-Mount & Gold Mount Batteries Right-Angle Connector
-
-
-
CAD$31.90
- Añadir al carrito
MXLR20
- For Canon C70, BMPCC 6K/4K and all cameras with mini XLR3 input 3-Pin Mini-XLR Male on One End 3-Pin XLR Female on Other End 9" in Length, Black and red Color
-
-
-
CAD$3,298.90
- Añadir al carrito
FX6KIT
- Sony FX6 baseplate (BP10) Top plate Controller top handle View Finder mount Matte box Follow focus pro
-
-
-
CAD$1,043.90
- Añadir al carrito
FX6BR
- FX6 cage, baseplate and left Arri rosette handle with Push-Button technology Baseplate with Arri rosette, shoulder mount and 15 mm rod system Front to back sliding plate for weight distribution Matches your camera’s optical center Shoulder pad made of slip-free material Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet knob…
-
-
-
CAD$1,098.90
- Añadir al carrito
FX6BT
- FX6 top plate, baseplate and left Arri rosette handle with Push-Button technology Baseplate with Arri rosette, shoulder mount and 15 mm rod system Front to Back sliding plate for weight distribution Matches your camera’s optical center shoulder pad made of slip-free material Protective rubber pads to protect your camera Front and rear 15 mm rod bloc system with safety ratchet…
-
-
-
CAD$768.90
- Añadir al carrito
FX6SM
- Compatible with Sony FX6 Quick release baseplate with 15 mm rods 18″ Quick release handgrips with Push-button and 15 mm rod bloc Shoulder pad and back pad, padded for superior comfort
-
-
-
CAD$499.40
- Añadir al carrito
FX6ROD
- Form fitting top, side and adapter plates Arri rosette mount on the side plate Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Sony FX6 handle Made of CNC lightweight aluminum Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws (1 pair) 15 mm 12″ rods Mounting holes for securing the camera on a tripod plate…
-
-
-
CAD$328.90
- Añadir al carrito
FX6CAGE
- Form fitting top, side and bottom plates Arri rosette mount on the side plate Several anti rotating threaded holes (3/8-16, ¼-20) Top plate compatible with the factory Sony FX6 handle Made of CNC lightweight aluminum
-
-
-
CAD$247.50
- Añadir al carrito
B15FX6
- Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws Comes with an adapter plate Comes with (1 pair) 15 mm 12″ rods Mounting holes for securing the camera or a tripod plate Ratchet key knobs to secure rods removable rod bloc system at each end of the riser Rubber pads at the top of the base to protect your SONY…
-
-
-
CAD$108.90
- Añadir al carrito
FX6TP
- Fits around the Sony FX6 top handle Lightweight and made of CNC aluminum Multiple 1/4-20 & 3/8-16 threaded holes with anti-rotating holes Designed with a threaded hole to insert your FX viewfinder cable clamp Designed to receive the SHAPE FX6VF assembly
-
-
-
CAD$328.90
- Añadir al carrito
FX6VF
- Sony FX6 viewfinder mount with 15 mm lightweight system rod bloc Designed with 15 mm SHAPE Patented Push-Button technology 2 Points of Articulation for horizontal and vertical adjustments Designed with monitor mount adapter for the Sony FX6 LCD screen monitor Can be mounted on one side only with the SHAPE rod clamp 15 mm (15CTH) Can be combined with either…
-
-
-
CAD$383.90
- Añadir al carrito
CTRLF6
- Modular top handle with SHAPE Patented Push-Button technology Perfect to attach more camera accessories Lets you place the handgrip in the up, side and down positions Top handle also features several 3/8-16 anti rotating threaded holes The handgrip is made of Canadian maple to maximize ergonomy, comfort and security Connects to the native Sony FX6 top handle Tilts up and…
-
-
-
CAD$438.90
- Añadir al carrito
FX6RH
- Compatible with SONY FX6 handle Includes male to female LANC Cable Easy to install and adjust Ratcheting lever to adjust the length (5 cm, 2 inches) Max Length: 11″; Folded Length: 5.6″ Designed with Arri rosettes to mount on the camera or baseplate Push-Button system with 360-degree rotation for several positioning options Push, adjust, release, and then it’s locked Made…
-
-
-
CAD$218.90
- Añadir al carrito
FX6HAR
- Relocates Sony’s FX6 Handgrip Mounts Using ARRI-Standard Rosette CNC machined stainless and aluminum
-
-
-
CAD$33.00
- Añadir al carrito
LANCCO14
- Plugs SHAPE Extension Handle to Sony FX6 LANC 3.5 mm Male Right Angle Connector LANC 3.5mm Female Connector 10" Long End-to-End Coiled
-
-
-
CAD$434.50
- Añadir al carrito
GBFX6
- Gold Mount pivoting battery plate compatible with SONY FX6 top plate (FX6TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector (Please refer to the camera’s operating manual for proper usage) Attaches to the Rear of the Sony FX6 top plate (FX6TP) Supports Gold-Mount Battery (1) D-Tap Ports & Protective Digital…
-
-
-
CAD$434.50
- Añadir al carrito
VBFX6
- V-Mount pivoting battery plate compatible with Sony FX6 top plate (FX6TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector (Please refer to the camera’s operating manual for proper usage) Attaches to the Rear of the Sony FX6 top plate (FX6TP) Supports V-Mount Battery (1) D-Tap Ports & Protective Digital Fuse…
-
-
-
CAD$108.90
- Añadir al carrito
FX6PC
- D-Tap Power Cable for Sony FX6 Regulates the voltage to power an FX6 camera (19.5V) Allows you to power your camera using any V-mount or Gold mount battery Cable has a total end-to-end length of 15″ (38 cm) Connector 1: 1 x D-Tap Connector 2: 1 x DC Barrel Converts 14.4 volt to 19.5 volt required to power the Sony…
-
-
-
CAD$64.90
- Añadir al carrito
BP9CH
- Dual charging port designed to charge two batteries at the same time Wide range compatibility of charge (8.4 V / 12.6 V / 16.8 V) Intelligent MCU control identify the voltage of the battery and prevent overcharge Charger plate is suitable for most CANON camera/camcorder batteries USB Output, perfect to charge your smartphone and other USB devices when the AC…
-
-
-
CAD$350.90
- Añadir al carrito
DPKLW
- Sliding Dovetail Design ARRI Standard Studio Bridge plate Balances Front- or Back-Heavy Equipment Stopper Screw and Safety Latch 12 x 1/4″-20 and 5 x 3/8″-16 Threads 1/4″-20 and (1) 3/8″-16 captive screws Locking Lever for Tightening Teflon Coating CNC-Machined Aluminum Construction
-
-
-
CAD$174.90
- Añadir al carrito
DPLWS
- ARRI Standard Studio Bridge plate (1) 1/4″-20 and (1) 3/8″-16 captive screws Locking Lever for Tightening Anodized Aluminum Construction
-
-
-
CAD$1,208.90
- Añadir al carrito
KOMOBR
- Designed to match the RED® KOMODO™ optical center with or without the expander module Compact REVOLT shoulder baseplate (BP20) Quick handle Arri rosette with black Push-button system (Hand15) Patented Push-button technology Push, adjust, release, and then its lock Padded and comfortable Shoulder Pad L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top…
-
-
-
CAD$1,868.90
- Añadir al carrito
KOSMKIT
- Designed to match the RED® KOMODO™ optical center with or without the expander module Quick Handle with Rod Bloc and Push-button System Padded and comfortable Shoulder Pad 15 mm LW Baseplate system with adapter plate and sliding dovetail for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle…
-
-
-
CAD$1,538.90
- Añadir al carrito
KOKIT
- Designed to match the RED® KOMODO™ optical center with or without the expander module 15 mm LW baseplate, adapter plate and a dovetail spacer L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle feature a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb)…
-
-
-
CAD$867.90
- Añadir al carrito
KOMOSM
- Designed to match the RED® KOMODO™ optical center with or without the expander module Quick Handle with Rod Bloc and Push-button System Padded and comfortable Shoulder Pad 15 mm LW Baseplate system with adapter plate and sliding dovetail for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle…
-
-
-
CAD$383.90
- Añadir al carrito
KOTHC
- Three-piece cage kit and top handle for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle feature a tilting bracket to mount a monitor, a video light, or a microphone (up to 4.4 lb) Top plate designed with 15 mm LW rod bloc clamp Side plates designed with…
-
-
-
CAD$713.90
- Añadir al carrito
KOROD
- Designed to match the RED® KOMODO™ optical center with or without the expander module 15 mm LW Baseplate system with adapter plate and sliding dovetail for RED® KOMODO™ camera L-shaped top handle with Push-Button Technology Top handle made of CNC aluminum and wooden Canadian maple Top handle feature a tilting bracket to mount a monitor, a video light, or a…
-
-
-
CAD$218.90
- Añadir al carrito
KOCAGE
- Three-piece cage kit for RED® KOMODO™ camera Designed with top plate with 15 mm LW rod bloc clamp Designed with ARRI rosette mount on the side plates Several anti rotating threaded holes (3/8-16, ¼-20) Made of CNC aluminum
