For Sony Alpha a7S III, a7 IV & A7R V cameras.
Top handle made of CNC Aluminum.
Top handle designed with multiple mounting options.
Formfitting Design cage with multiple mounting options.
Strap hooks can remain attached to the camera while inserted in the cage.
Made from CNC-machined aluminum, the cage is specially designed for the Sony Alpha a7S III, a7 IV and A7R V. The camera is strongly mounted to the cage using a 1/4-20 screw and an Allen key. The cage is designed with the following mounting options: (1) cold shoe, several 1/4-20 threaded holes and (7) 3/8"-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 3 left cables as well as your 4K FULL HDMI cable is included with the cage. The bottom of the cage has (2) 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. A DELTA adapter can be added to mount on 15 LWS baseplate, (not included). an ARRI rosette can be added on the right side to mount compatible accessories.
ALUMINUM TOP HANDLE
Made of CNC aluminum
Designed with a 15 mm rod holder secured by a ratchet knob
Strongly attach to the cage with (1) 3/8-16 screw with anti-rotating locking pins
(4) cold shoe attachment
(1) 3/8-16 threaded hole with anti-rotating locking pins
(4) 3/8-16 threaded holes
(9) ¼-20 threaded holes
What's in the box
(1) Camera cage
(1) Top Handle
Additional information
Weight
1.36 lbs
Dimensions
8 × 7 × 3 in
Reviews
There are no reviews yet.
Be the first to review “SONY A7S3, A7 IV, A7R V CAGE WITH TOP HANDLE” Cancel reply
Specifications
Weight:
1.1 lbs
0.50 kg
Dimensions:
6.18 x
6.90 x
5.70 in
15.70 x
17.53 x
14.48 cm
UPC:
629266102213
Lifetime Manufacturer's Warranty
All SHAPE products and accessories are covered by a manufacturer’s warranty solely on CNC machined parts.
All calls for service or repairs should be referred and sent directly to SHAPE. For an out-of-box failure, you may contact SHAPE by email at [email protected] or call 1-888-968-9810 (Canada/U.S.) or 1-450-447-4444.
SHAPE® Brand Warranty
All SHAPE® brand products have a lifetime warranty unless otherwise stated. Please email us at [email protected] or call 1-888-968-9810 (Canada/U.S.) or 1-450-447-4444 for repairs or exchanges on your SHAPE® brand products.
Reviews
There are no reviews yet.