Selected:

19 mm studio sliding baseplate for Sony Venice

CAD$1,065.90

Free Shipping to Canada & US on orders over $99
Home > Camera Rigs > Sony > Venice > 19 mm studio sliding baseplate for Sony Venice

19 mm studio sliding baseplate for Sony Venice

SKU: VN19D
Crafted in Canada
Lifetime Warranty

Key Features

ARRI-Standard Dovetail Bridgeplate
Correct Optical Axis for VENICE
Sliding Camera Plate
Compatible with 19 mm Studio Accessories
Pair of 19 mm 12″rods with 104 mm spacing
12” Dovetail

CAD$1,065.90

Order by 11 am to ship today
Free Shipping to Canada & US on orders over $99
All you need to know about the

VN19D

Related products

Description

SHAPE lightweight Arri standard 12" dovetail plate (DP12A)

01 Shape Dp12a Product Picture 1 2000x2000

Use this ARRI Standard 12″ Dovetail Plate from SHAPE when balancing front- or back-heavy camera loads. The studio bridgeplates 19 mm or 15 mm Arri standard (DPK19, DPK15) can easily slide onto the lightweight ARRI standard 12″ dovetail plate for additional leverage and mounting options. Both the aluminum, Teflon-coated design and tapered ARRI dovetail configuration allow your mounted equipment to slide back and forth easily. A stopper screw on one end and a safety latch on the other prevent your equipment from accidentally sliding off the plate. There are twelve 1/4″-20 and five 3/8″-16 threads down the center of the plate for mounting.

SHAPE Bridge plate 19 mm studio Arri standard (DP19S)

01 Shape Dp19s Product Picture 2000x2000

The studio bridgeplate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options. It is made of CNC aluminum and it is also designed with locking levers to secure the bridgeplate to the dovetail. The ARRI Standard Studio Bridgeplate comes with two tapered, 12″ 19 mm rods (19TUBE12) to easily mount and dismount your camera and accessories. The studio-offset rods are spaced 104 mm apart. One 1/4″-20 and one 3/8″-16 screw allow mounting a variety of cameras, and the plate locks and slides up and down the rods with the use of a locking lever. A flat screwdriver is provided to tighten the mounting screws, and it can be attached to the bridgeplate with a magnet.

19 mm 12" rods (19TUBE12)

01 Shape 19tube12 Product Picture

This pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.
The rods are each 19 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

19 mm 12" rods (19TUBE12)

01 Shape 19tube12 Product Picture

This pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.
The rods are each 19 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

Sliding riser and locking lever

The Riser allows to adjust the position of your camera while mounted on the Bridge Plate with respect to the 19 mm Studio Optical Center of the Sony Venice Camera. An easy-to-access locking lever, located on the side of the Riser, enables you to secure the Camera Plate firmly in place. There is also a quick release safety pin that prevents the Camera Plate from sliding off the Riser which is fully engaged when the latch makes an audible “click” sound. Several 1/4″-20 and 3/8″-16 threaded holes are also available for attaching the Riser onto the Bridge Plate. It is also designed to set the Sony Venice camera at proper height with respect to the camera Optical Center

What's in the box

  • (1) ARRI STANDARD 12″ SLIDING DOVETAIL
  • (1) 19MM STUDIO ARRI STANDARD BRIDGE PLATE
  • (1) SLIDING RISER AND LOCKING LEVER
  • (1) SLIDING CAMERA PLATE
  • (1) PAIR OF 19MM RODS (12”)

Additional information

Weight 4.52 lbs
Dimensions 14.00 × 5.00 × 4.00 in

Reviews

There are no reviews yet.

Be the first to review “19 mm studio sliding baseplate for Sony Venice”

Your email address will not be published. Required fields are marked *

logo lifetime warranty

Lifetime Manufacturer's Warranty

All SHAPE products and accessories are covered by a manufacturer’s warranty solely on CNC machined parts.

All calls for service or repairs should be referred and sent directly to SHAPE. For an out-of-box failure, you may contact SHAPE by email at sales@shapewlb.com or call
1-888-968-9810 (Canada/U.S.) or 1-450-447-4444.

SHAPE® Brand Warranty

All SHAPE® brand products have a lifetime warranty unless otherwise stated. Please email us at sales@shapewlb.com or call
1-888-968-9810 (Canada/U.S.) or 1-450-447-4444 for repairs or exchanges on your SHAPE® brand products.

Specifications

Weight:
4.21 lbs
1.91 kg
Dimensions:
3.41 x
5.71 x
11.81 in
8.66 x
14.50 x
30.00 cm
UPC:
629266008249
Close Menu
×
×

Cart

Need support?

For any questions please fill in the form

Work with Us

tell us why you would be a great team member

NEW CUSTOMER OFFER

Subscribe to receive 10% off on your first order!

THANK YOU

You’ll receive your promo code by email soon…

Go check your mailbox!

10% off

Welcome!

Save 10% at checkout with code SHAPEit