Kostenlose Lieferung bei Einkäufen über 99$ nach Kanada und in die Vereinigten Staaten von Amerika
-
-
-
CAD$19.80
- In den Warenkorb
SKHDM
- 18’’ HDMI to HDMI 8K Ultra High-Speed cable. Up to 8K at 60 Hz or 4K at 120 Hz. Designed for cameras & monitors with HDMI connectors. HDMI Type-A to Type-A Male. Up to 8K at 60 Hz or 4K at 120 Hz. Up to 48 Gb/s Data Transfer Rate. ALLM, VRR & QFT for Low-Latency Gaming. Thin & Flexible…
-
-
-
CAD$19.80
- In den Warenkorb
SKCRO
- 18’’ HDMI to Micro HDMI 8K Ultra High-Speed cable. Up to 8K at 60 Hz or 4K at 120 Hz. Designed for cameras & accessories with Micro HDMI connectors. HDMI Type-A to Type-A Male Micro. Up to 8K at 60 Hz or 4K at 120 Hz. Up to 48 Gb/s Data Transfer Rate. ALLM, VRR & QFT for Low-Latency Gaming.…
-
-
-
CAD$19.80
- In den Warenkorb
SKMIN
- 18’’ HDMI to Mini HDMI 8K Ultra High-Speed cable. Up to 8K at 60 Hz or 4K at 120 Hz. Designed for cameras & accessories with Mini HDMI connectors. HDMI Type-A to Type-A Male Mini. Up to 8K at 60 Hz or 4K at 120 Hz. Up to 48 Gb/s Data Transfer Rate. ALLM, VRR & QFT for Low-Latency Gaming.…
-
-
-
CAD$434.50
- In den Warenkorb
GPFX9
- Attaches to the Rear of the Sony FX9 Camera. Supports Gold Mount Batteries. Swivel system let you pivot the battery plate horizontally. Magnetic system to open and to close the back plate. (1) D-Tap Ports & Protective Digital Fuse. (1) D-Tap Power Cable for Sony FX9 (15’’). Multiple holes on top and side of the top plate for a lighter…
-
-
-
CAD$434.50
- In den Warenkorb
VPFX9
- Attaches to the Rear of the Sony FX9 Camera Supports V-Mount Battery Swivel system let you pivot the battery plate horizontally Magnetic system to open and to close the back plate (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for Sony FX9 (15’’) Multiple holes on top and side of the top plate for a lighter design.…
-
-
-
CAD$1,017.00
- In den Warenkorb
HD15
- Payload: 33 lbs (15 kg). Compatible with 100mm bowls. Aluminum Ratchet Knobs on Fluid head. Weight: 6.8 lbs (3 kg). Pan Range: 360° (One gear-4 steps). Tilt Range: +90°/-70° (Two gears – 12 steps). Temperature Range: -40/+60° Balance Plate Range: 0-70mm with Quick-Release. Spreader: Floor Spreader. Handle: Single Pan Handle.
-
-
Angebot!
-
CAD$1,045.00 CAD$794.20
- In den Warenkorb
- Designed to welcome 100mm Fluid tripod heads (HD15). Adjustable Height Range: 16 1/8 to 58 1/2” (41 to 148.5 cm). Bowl Diameter: 100mm Carbon Fiber legs. Aluminum leg clamps. Weight: 7.5 lbs / 63.4 kg. Temperature Range: -40/+60° Spreader: Floor Spreader. Tripod section: Two stages. Transport bag included.
-
-
-
CAD$2,420.00
- In den Warenkorb
HD20
- Payload: 45 lbs (20 kg). Compatible with 100mm bowls. Aluminum Ratchet Knobs on Fluid head. Weight: 7.8 lbs (3.54 kg). Pan Range: 360° (One gear-8 steps). Tilt Range: +90°/-70° (Two gears – 16 steps). Temperature Range: -40/+60° Balance Plate Range: 0-70mm with Quick-Release. Spreader: Floor Spreader. Handle: Single Pan Handle.
-
-
Angebot!
-
CAD$1,320.00 CAD$1,003.20
- In den Warenkorb
- Designed to welcome 100mm Fluid Tripod heads (HD20). Adjustable Height Range: 18 3/4 to 60” / 47.5 to 152.4 cm. Bowl Diameter: 100mm Carbon Fiber legs. Aluminum leg clamps. Weight: 8.5 lbs / 3.86 kg. Temperature Range: -40/+60° Spreader: Floor Spreader. Tripod section: Two stages. Transport bag included.
-
-
-
CAD$25.08
- In den Warenkorb
C20ARM
- Designed to be installed on C-Stands & light stands. 5/8’’ diameter bar. 22’’ / 51 cm in length. Usually combined with grip heads at each end. Anti-slip studs at each end (1/4-20 & 3/8-16). Made of solid stainless steel.
-
-
-
CAD$25.74
- In den Warenkorb
C40ARM
- Designed to be installed on C-Stands & lightstands. 5/8’’ diameter bar. 42’’ / 106.68 cm in length. Usually combined with grip heads at each end. Anti-slip studs at each end (1/4-20 & 3/8-16). Made of solid stainless steel.
-
-
-
CAD$383.90
- In den Warenkorb
PANST
- Geeignet für die Stativserien ST15-ST20. Gewicht: 1 lbs. / 0,45 kg. Länge: 34,3 cm (13,5''). Der Schwenkgriff ist an 3 Punkten beweglich. SHAPE Patentierte Druckknopf-Technologie. Ergonomischer Griff mit Gummigriffen für Stabilität und Präzision. Verriegelungsmechanismus aus rostfreiem Stahl für lange Haltbarkeit. Ausgestattet mit (2) ¼-20 und (2) 3/8-16 ARRI-Standard-Gewindebohrungen mit Verdrehsicherung. Hergestellt aus CNC-gefrästem Aluminium für Widerstandsfähigkeit.
-
-
Angebot!
-
CAD$42.90 CAD$32.18
- In den Warenkorb
DIVB
- 4 Trennstege für Kamerataschen 2 große (10 x 8'') – 2 kleine (8 x 6 ''). Aus starkem Polyestermaterial mit einem Kern aus Hartpappe. Leicht abnehmbar, um die Fächer im Inneren der Tasche zu konfigurieren. Klettbänder und -verschlüsse
-
-
-
CAD$49.50
- In den Warenkorb
UNST
- Universal Camera strap. Adjustable length from 38.75 to 53.75’’ / 98.5 to 136.5 cm. Designed to hold up to 200 lbs of gear. Made of seatbelt quality super resistant nylon. Includes 2 aviation aluminum quality adjustment buckles. Quick-release anchor mounts at each end. Center part padded for additional comfort. Ideal for monitors, cameras and more.
-
-
-
CAD$19.80
- In den Warenkorb
UTUCF
- USB-C to USB-C Fast Charging Cable. Charges batteries in combination with D-Tap to USB-C Bi-directional charging adapter with SHAPE’s 450W Fast Charger (Gold Mount/V-Mount/BP-U with D-Tap ports). Charges batteries with USB-C ports (B-Mount and more). Length: 40 ¼ in. / 102 cm. Connector Type: USB Type C. Made of resistant materials. 30-day limited warranty on all manufacturer defects.
-
-
-
CAD$38.49
- In den Warenkorb
MCLP
- Hergestellt aus solidem Aluminium. Öffnungsbereich der Backen: 13 - 55mm Die Schutzpolster bieten eine starke Greifwirkung. Ratschenknopf mit Backen. ¼-20 Gewinde für zusätzliches Zubehör Herausnehmbare Keil-Einlagen.
-
-
-
CAD$306.90
- In den Warenkorb
V99MB
- 99 Wh (14,4 V) 10 A V-Mount Lithium-Ionen-Akku 2 integrierte USB-Schnittstellen (5 V, 2 A) zum Aufladen elektronischer und mobiler Geräte Eingebautes LCD-Display zur Anzeige der verbleibenden Leistung und des Ladestatus 2 Jahre Garantie auf alle Herstellerfehler Von der IATA zugelassener Akku, sicher für Flugreisen und vereinfacht Ihre Reiseoptionen Unterstützt bis zu 10A kontinuierlichen Stromverbrauch Intelligente Steuerung und Schutzschaltung Temperatur-,…
-
-
-
CAD$548.90
- In den Warenkorb
AKSCL
- Leichtes und kompaktes Design Zwei 4 x 5,6 große Filterschalen (eine drehbar) Abnehmbare Silikon-Shadebox 5 x abnehmbare Ringe und Carbonfaser-Fahne
-
-
-
CAD$746.90
- In den Warenkorb
AKSWA
- Leichtes und kompaktes Design Abnehmbare Silikon-Schirmdose Swing-Away System 15mm LWS-Stabhalterung Zwei 4×5,6 Filterschalen (eine drehbar) Drei verschiedene Konfigurationen in einem Bausatz. (abschwenkbar, gerade, aufsteckbar) 6 abnehmbare Adapterringe und Carbon Fiber French flag
-
-
-
CAD$207.90
- In den Warenkorb
MDTVM
- Hergestellt aus CNC-Aluminium Vier eingebaute P-Tap-Anschlüsse (14,4V - 10A max) Passt auf 15mm LWS-Stangen Ein Drehknopf zum Festziehen
-
-
-
CAD$97.90
- In den Warenkorb
SBTK
- Entwickelt für Kameraassistenten, Grips und Techniker. Aus strapazierfähigem Nylon. Inklusive Schnellverschluss, MOLLE-Gurtband und einer Zubehörtasche. Der Gürtel ist von 91 bis 121 cm verstellbar
-
-
-
CAD$97.90
- In den Warenkorb
12G24
- Hochwertiges schwarzes 90-Grad-BNC-Stecker-auf-90-Grad-BNC-Stecker-Kabel; Entwickelt für die Aufnahme/Übertragung von Videosignalen sowohl serieller Daten als auch 12G 4K ProRes Raw; Kompatibel mit HD-Kameras, Gimbals, Monitoren, EVF, Antennen, SDI Wireless TX/RX Sets oder anderen Geräten mit Serial Digital Interface (SDI); Länge: 60,96 cm Impedanz: 75 ohm Frequenz: 12 GHz 12G- 4k fähiges SDI-Kabel
-
-
-
CAD$108.90
- In den Warenkorb
PMPW
- Wird an der oberen Kameraplatte oder den Seitenplatten befestigt Unterstützt Mikrofonempfänger und sonstiges Zubehör Aus eloxiertem Aluminium in CNC-Leichtbauweise ¼-20-Kameraschraube und Reducer 3/8 auf ¼ Antirutsch-Klettverschlussband
-
-
-
CAD$31.90
- In den Warenkorb
MXLR20
- Für Canon C70 & BMPCC 6K/4K-Kameras 3-Pin Mini-XLR Stecker an einem Ende 3-polige XLR-Buchse am anderen Ende Länge: 9 Zoll (22,8 cm), Farben: schwarz und rot
-
-
-
CAD$33.00
- In den Warenkorb
LANCCO14
- Verbindet die SHAPE Remote Extension Handle mit derSony FX6 Rechtwinkliger 3,5mm LANC Stecker 3.5mm LANC Buchse Spiralkabel mit ca. 25 cm Länge
-
-
-
CAD$71.50
- In den Warenkorb
BP9CH
- Dual charging port designed to charge two batteries at the same time. Wide range compatibility of charge (7.4 V / 12.6 V / 16.8 V). Intelligent MCU control identify the voltage of the battery and prevent overcharge. Charger plate is suitable for most CANON camera/camcorder batteries. USB Output, perfect to charge your smartphone and other USB devices when the AC…
-
-
-
CAD$350.90
- In den Warenkorb
DPKLW
- Verschiebbare Dovetail-Konstruktion ARRI Standard Studio Bridge Plate Balanciert front- oder rückenlastige Ausrüstung Anschlagschraube und Sicherheitsverriegelung 12 x 1/4″-20 und 5 x 3/8″-16 Gewinde 1/4″-20 und (1) 3/8″-16 gesicherte Schrauben Feststellhebel zum Anziehen Teflon-Beschichtung CNC-gefertigte Aluminium-Konstruktion
-
-
-
CAD$174.90
- In den Warenkorb
DPLWS
- ARRI Standard Studio Bridge Platte (1) 1/4″-20 und (1) 3/8″-16 gesicherte Schrauben Feststellhebel zum Anziehen Eloxierte Aluminium-Konstruktion
-
-
-
CAD$240.90
- In den Warenkorb
BP92B
- Two BP-975 7.4V, 7800mAh lithium-ion batteries. Batteries will not display power level in RED® KOMODO™ LCD. One BP dual LCD 16.8V Charger. Charges two batteries simultaneously. Clear LCD charger Display. USB Output to Charge Accessories. AC Power Cables Included. 1-year limited warranty on all manufacturer defects.
-
-
-
CAD$163.90
- In den Warenkorb
SCSTZ
- Touch-Free Stainless-Steel auto-dispenser with mounting clamps Help to reduce the spread of infection Designed with five levels of antibacterial hand gel supply from 0.5ml to 2.5ml Conform to COVID-19 protocols that productions, studios and rentals houses are implementing Extremely quiet operation, easy to install, easy setting button Built-in accurate Infrared motion sensor that detects your hand within one pass Compatible…
-
-
-
CAD$48.40
- In den Warenkorb
FLEX1
- ¼-20 auf ¼-20 flexibler Montage Arm Optimal zur Montage von Monitoren, LED Lichter, oderr Mikrofone in jedem beliebigen Winkel Flexible 20mm Kugelgelenke an beiden Enden mit Gummiringen für sicheren Halt Großer Verriegelungshebel mit einem T-Griff bietet sicheren Halt zum Festziehen oder Lösen Eingefaste Rändelschrauben zur einfachen Montage Trägt mehr als 2kg Gesamtlänge 5'' Aus CNC-gefrästem Aluminium
-
-
-
CAD$71.50
- In den Warenkorb
FLEX2
- Flexibler ¼-20 auf 3/8-16 Montage Arm mit Verdrehschutz Optimal zur Montage von Monitoren, LED Lichter oder Mikrofone in jedem beliebigen Winkel Frei verstellbare 25mm Kugelgelenke an beiden Enden mit Gummiringen für sicheren Halt Verriegelungshebel in der Mitte bietet sicheren Halt zum Festziehen oder Lösen Eingefasste Rändelschrauben zur einfachen Montage Trägt mehr als 3,5 kg Gesamtlänge 6'' Gummipolster zum Schutz Ihres…
-
-
-
CAD$141.90
- In den Warenkorb
FLEX3
- Optimal zur Montage von Monitoren, LED Lichter, oderr Mikrofone in jedem beliebigen Winkel Frei verstellbare 25mm Kugelgelenke an beiden Enden mit Gummiringen für sicheren Halt Verriegelungshebel in der Mitte bietet sicheren Halt zum Festziehen oder Lösen Eingefaste Rändelschrauben zur einfachen Montage Trägt bis zu 1,8kg Gesamtlänge 12'' Gummipolster zum Schutz Ihres Zubehörs Aus CNC-gefrästem Aluminium
-
-
-
CAD$48.40
- In den Warenkorb
M11CS
- Perfekt zur Montage von Monitoren, LED Lichtern, oder Mikrofonen Dank des Schwenkmechanismus an den Kugelgelenken können Sie Ihr Zubehör in einem beliebigen Winkel ausrichten Stabile zentrale Rosettenverbindung mit Daumenschraube Gesicherte ¼-20 Schraube mit sehr festem Verriegelungssystem Jedes Ende verfügt über eine gummierte Platte am Gewinde und verhindert das Verdrehen des Zubehörs Trägt bis zu 4,5 kg Hergestellt aus CNC-gefrästem Aluminum
-
-
-
CAD$42.90
- In den Warenkorb
M7CS
- Perfekt zur Montage von Monitoren, LED Lichtern, oder Mikrofonen Dank des Schwenkmechanismus an den Kugelgelenken können Sie Ihr Zubehör in einem beliebigen Winkel ausrichten Stabile zentrale Rosettenverbindung mit Daumenschraube Gesicherte ¼-20 Schraube mit sehr festem Verriegelungssystem Jedes Ende verfügt über eine gummierte Platte am Gewinde und verhindert das Verdrehen des Zubehörs Trägt bis zu 4 kg Hergestellt aus CNC-gefrästem Aluminium
-
-
-
CAD$163.90
- In den Warenkorb
LFWB
- Perfekt für die Montage von Monitoren, LED-Leuchten oder Mikrofonen in nahezu jedem Winkel Vollgelenkarm mit um 90° schwenkbaren und um 360° drehbaren Enden Der Verriegelungsknopf ermöglicht ein teilweises Lösen für eine sichere und präzise Positionierung Kugelgelenk an jedem Ende mit 5/8" Bolzen mit 3/8" und ¼" Innengewinde trägt bis zu 3 kg Gewicht Gesamtlänge: 20 Zoll (ca. 51 cm) Aus…
-
-
-
CAD$22.00
- In den Warenkorb
3SHM
- Triple shoe mount made of CNC aluminum allows the use of multiple shoe rack accessories Perfect for vlogging and video shooting (3) Female cold shoe, perfect to attach microphone, LED video light or any other compatible devices (1) Male cold shoe designed with a thumbscrew knob with ¼-20 threaded hole to strongly attach the device to your camera body
-
-
-
CAD$53.90
- In den Warenkorb
ALTH
- Top handle made of CNC Aluminum Top handle designed with multiple mounting options Designed with a 15 mm rod holder secured by a ratchet knob Strongly attach to the camera body with (1) 3/8-16 screw with anti-rotating locking pins (4) cold shoe attachment (1) 3/8-16 threaded hole with anti-rotating locking pins (4) 3/8-16 threaded holes (9) ¼-20 threaded holes
-
-
-
CAD$42.90
- In den Warenkorb
LPMQ
- Compact quick release plate with ¼-20 screw Universal mount plate perfect to mount monitors, GoPro and accessories 50 kg Load bearing Press both sides to unlock Anti-skid pad Sliding lock to avoid damage to the device caused by mis contact Deadlock mode button to keep top plate in place ¼-20 threaded holes at the bottom Made of CNC Aluminum
-
-
-
CAD$53.90
- In den Warenkorb
UCTH
- Provides a comfortable grip and multiple accessory mounts for your DSLR, camcorder, or mirrorless camera Strongly attaches to your camera or cage's shoe mount Hexagonal knob provides quick, easy mounting on your camera or rig (3) female cold shoe attachment Cheese plate handle features (17) ¼-20 and (8) 3/8-16 threaded holes Lightweight and made of aluminum alloy anodized
-
-
-
CAD$218.90
- In den Warenkorb
GPMC
- Gold Mount pivoting battery plate compatible with the Shogun 7 monitor only Push-button system let you tilt the battery plate up and down Easy access to the rear connector of the monitor Universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes Cheeseplate made of CNC Aluminum
-
-
-
CAD$218.90
- In den Warenkorb
VPMC
- V-Mount pivoting battery plate compatible with the Shogun 7 monitor only Push-button system let you tilt the battery plate up and down Easy access to the rear connector of the monitor Universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes Cheeseplate made of CNC Aluminum
-
-
Angebot!
-
CAD$328.90 CAD$246.68
- In den Warenkorb
SBAG
- Made of resistant fabric Outside: 12 x 20 x 12 in (30 x 50.8 x 30 cm) Inside: 11 x 20 x 10 in (27.9 x 50.8 x 25.4 cm) Volume: 36 liters 3 removable pouches (tools – pens – cables) “Molle” system pattern for removable pouches Led light zippers in inner pockets of cover Fully padded interior Removable rain-dust…
-
-
-
CAD$97.90
- In den Warenkorb
VFSA
- Viewfinder adapter compatible with the L-SHAPE pro top handle Designed with 15 mm standard clamp
-
-
-
CAD$53.90
- In den Warenkorb
ASTD15
- 15 mm rod clamp compatible with L-SHAPE pro top handle
-
-
-
CAD$544.50
- In den Warenkorb
TRIPAN1
- Telescopic tripod pan handle with Sachtler rosette adapter Quick and easy installation to your Sachtler tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
-
-
CAD$544.50
- In den Warenkorb
TRIPAN2
- Telescopic tripod pan handle with O'Connor rosette adapter Quick and easy installation to your O'Connor tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
-
-
CAD$544.50
- In den Warenkorb
TRIPAN3
- Telescopic tripod pan handle with Cartoni rosette adapter Quick and easy installation to your Cartoni tripod Let you manipulate your tripod in various positions Patented (black) Push-button system for fast adjustment Push, adjust, release, and then it's immediately locked Telescopic arm extends up to 2'' and rotates throughout 360° Shorter configuration by easily dissasembling the telscopic arm Max length: 15''…
-
-
-
CAD$1,868.90
- In den Warenkorb
CUFKIT
- Let you connect your Arri Rosette Handles to your rig Clip the rod block onto your rig, and you're good to go (3) strong cuff let you switch between 15 to 19 mm LWS or Studio You can clip the cuff above or below the rods (1 pair) of telescopic handles with Push-button When you’re short on space, use the screwdriver included to shorten the Telescopic…
-
-
-
CAD$218.90
- In den Warenkorb
CUF15
- Clamp Arri rosette handles or accessories on 15mm LWS rods Block for 15mm LWS (Light Weight Support) rods Block designed with a super strong cuff system and ratchet knob Designed with standards ARRI rosettes on each side