Match Sony FX9 optical center
Bracket system with magnet let you swivel the baseplate
Protective rubber pads to protect your camera
Front and rear 15 mm rod bloc system with safety ratchet knob
Come with 2 pairs of 15 mm rods (8”, 4”)
Designed with 2 standard Arri rosettes for handles mount
Comfortable shoulder pad made of slip-free material
Sophisticated tool box to store your extra screws and Allen key
Quick release adapter plate for VCT tripod plate mount
Made of CNC Machined Aluminum
The FX9 baseplate is designed to match the Sony FX9 optical center. The bracket system with magnet let you swivel the baseplate to the left for an easy access to the camera screws. It is designed with 2 standard Arri rosettes for handles or accessories mount. The quick release adapter plate is compatible with most VCT tripod plate and there is also a protective rubber pads on top of the plate to protect your camera. Two 15 mm lightweight rod blocs can be fixed to the front and rear of the baseplate, allowing you to install more camera accessories. The safety ratchet knobs are built in a way to apply an optimal pressure to the rods. The thick shoulder pad produces maximum comfort and is made of gel padding and slip-free material. The baseplate is also designed with a sophisticated tool box to store your extra screws and Allen key. Quick access to your extra screws and Allen key can be a time saver, even more so, when you are in the middle of a shoot. The shoulder plate is equipped with 1/4-20 & 3/8-16 threaded holes allowing extra screws to be stored and there is a magnet at the back to attach your Allen key.
The rear insert plate is a CNC aluminum support plate compatible with the Sony FX9 camera. The plate mounts to the camera body via three M4 mounting screws. The center of the plate is designed with (3) 3/8-16 and (3) 1/4-20 threaded holes for tripod mount. The large surface of the plate also provides necessary support when the camera is mount to a tripod or a shoulder mount.
Pair of 15 mm rods 8" long that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. The rods are machined from hollow aluminum tubes and feature chamfered ends that make it easier to insert into 15 mm rod clamps, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.
This pair of SHAPE 15 mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.
The rods are each 15 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.
What's in the box
(1) Shoulder Mount Baseplate (BP20)
(1) Rear insert plate (FX9RIP)
(1 pair) 15mm 8” rods
(1 pair) 15mm 4” rods
14 × 5 × 4 in
Lifetime Manufacturer's Warranty
All SHAPE products and accessories are covered by a manufacturer’s warranty solely on CNC machined parts.