描述
用於佳能 R5C/R5/R6 的SHAPE相機保持架和 15mm 輕量工作室桿系統 (R5CROD)
Canon R5C Cage (R5CCAGE)
Made of CNC-machined aluminum, the cage is specifically designed for the Canon R5C, R5 and R6 cameras. The camera is mounted to the cage using a 1/4-20 screw. The cage is designed with several 1/4-20 threaded holes and seven 3/8″-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 4K Micro HDMI to HDMI cable is included with the cage. The bottom of the cage has three 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. The aluminum top handle included with the cage offers cold shoe mounting options for additional accessories. A second top handle can be added and attached on the sides of the cage for vertical shoots.
A 15mm LW rod baseplate system is included and attached underneath the cage with four M4 screws. A height adjustable Metabones® bracket is included at the front of the baseplate for additional support. The bottom of the baseplate has three threaded holes to attach quick-release tripod plates.
SHAPE 輕量單濾鏡拖 4X5.6 啞光盒 (LWAKS)
A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses.
A single filter tray system with an easy access handle that allow one-handed filter change. The filter tray system opens up from the front by releasing the red safety pin. 4x4 filters can also be installed in the tray. The frame includes two stops at the bottom of the filter tray section to prevent the filter from falling through.
Optional removable swing-away and height adjustable rod bloc can be installed for better control.
An optional removable light carbon fiber french flag can be attached on top to prevent flares. A series of adaptor rings are included in the kit:
Clamp-on adaptor ring: 124-87 mm
Threaded aluminum adaptors rings: 87-82 mm / 87-77 mm / 87-72 mm / 87-67 mm
Additional clamp-on adaptor rings available (Optional): 124-114 mm / 124-104 mm / 124-100 mm / 124-95 mm
SHAPE 15mm LWs 單桿夾鉗跟焦器套件 (FA123)
使用緊湊的 SHAPE 跟焦器套件和單 15 mm 桿夾配合相機設置,使對焦更加輕鬆。組件設計讓您可以添加和拆卸任何元件,無需螺釘或工具,其小輪廓可以讓您在鏡頭周圍添加啞光盒或附件。• 套件的核心部位是橡膠,防滑跟隨對焦輪連接到單個鋁 15 mm 桿夾上。夾具通過旋轉來配合大多數鏡頭尺寸,然後通過鎖定杆擰緊。夾具的旋轉還能讓對焦輪在更換鏡頭時輕鬆轉移位置。• 內含五個驅動齒輪,適合各種鏡頭尺寸:0.5 MOD/78T、0.6 MOD/64T、0.8 MOD/38T、0.8 MOD/43T 和 0.8 MOD/78T。齒輪可以由前向後翻轉,以方便不同的鏡頭配置。0.5 MOD/78T 齒輪還包含 49 mm 橡膠摩擦輪,該齒輪最常用於 DSLR 鏡頭。• 對於備用精細對焦配置,請使用隨附的速度曲柄或 11" 鞭子,兩者都連接到旋鈕的中心點。包括四個用於連接到對腳輪的磁標盤。
- 在旋鈕的中心,一個 ARRI 標準的附件端口,用於連接如鞭子或速度曲柄這種單獨的附件;
- 所有齒輪都可以翻轉到前部或後部位置,有助於緊湊型鏡頭配置;
- 兩個旋轉點(一個在桿上,一個在身體上),使跟焦器與相機機身的一側完全垂直對齊;
- 擺動臂設計讓您可以簡單地將跟焦器從鏡頭中拉出,快速更換鏡頭,然後在準備就緒時將其推回原位;
- 緊湊的設計佔用空間很小,因此您仍可以將啞光盒連接到正面;
- 使用擺動臂對齊跟焦器,然後可以擰緊底部的拇指螺釘固定 。
评价
目前还没有评论