Form fitting top, side and adapter plates
Arri rosette mount on the side plate
Several anti rotating threaded holes (3/8-16, ¼-20)
Top plate compatible with the factory Sony FX6 handle
Made of CNC lightweight aluminum
Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws
(1 pair) 15 mm 12″ rods
Mounting holes for securing the camera on a tripod plate
Ratchet key knobs to secure rods
Removable rod bloc system at each end of the riser
Rubber pads at the top of the base to protect your Sony FX6
Add accessories and handheld functionality to your Sony FX6 camera with this kit made of CNC aluminum. It includes a form fitting side plate with Arri rosette, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the factory Sony FX6. The bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod The lightweight baseplate with 15 mm rod system is designed to match the SONY FX6 optical center. It features two attachment points (1/4-20 and 3/8-16) to securely mount the SONY FX6 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate.
Add accessories and handheld functionality to your Sony FX6 camera with this kit made of CNC aluminum. It includes a form fitting side plate with Arri rosette, a top plate and the adaptor plate connecting together with the side post to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the factory Sony FX6. The bottom of the plate features several 1/4″-20 and 3/8″-16 holes for mounting and balancing your camera on equipment like a tripod.
The lightweight baseplate with 15 mm rod system is designed to match the SONY FX6 optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Sony FX6 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod.
This pair of SHAPE 15 mm Aluminum Rods (12") connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.
The rods are each 15 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.
What's in the box
(1) Cage for Sony FX6
(1) Base with removable rod bloc (B15FX6)
(1 pair) Rods 15 mm 12”
Additional information
Weight
2 lbs
Dimensions
14.00 × 5.00 × 4.00 in
Reviews
There are no reviews yet.
Be the first to review “Sony FX6 camera cage and 15 mm LW rod system” Cancel reply
Specifications
Weight:
1.65 lbs
0.75 kg
Dimensions:
12.00 x
4.25 x
5.25 in
30.48 x
10.80 x
13.34 cm
UPC:
629266102534
Lifetime Manufacturer's Warranty
All SHAPE products and accessories are covered by a manufacturer’s warranty solely on CNC machined parts.
All calls for service or repairs should be referred and sent directly to SHAPE. For an out-of-box failure, you may contact SHAPE by email at [email protected] or call 1-888-968-9810 (Canada/U.S.) or 1-450-447-4444.
SHAPE® Brand Warranty
All SHAPE® brand products have a lifetime warranty unless otherwise stated. Please email us at [email protected] or call 1-888-968-9810 (Canada/U.S.) or 1-450-447-4444 for repairs or exchanges on your SHAPE® brand products.
Reviews
There are no reviews yet.