描述
用於索尼 FX3 的保持架 (FX3CAGE)
CNC-milled aluminum cage specifically designed to protect and support the Sony FX3. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple ¼-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter.
SHAPE 旋轉式啞光盒 (AKSWA)
A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses.
Two 4x5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4x4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed.
Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on).
Removable light carbon fiber french flag can be attached to the top to prevent flares. A series of adapter rings are included in the kit:
Clamp-on adapter ring: | 124-87 mm |
Threaded aluminum adapter rings: | 87-82 mm 87-77 mm 87-72 mm 87-67 mm |
Fabric knicker: | 124 mm |
SHAPE 15mm LWs 單桿夾鉗跟焦器套件 (FA123)
使用緊湊的 SHAPE 跟焦器套件和單 15 mm 桿夾配合相機設置,使對焦更加輕鬆。組件設計讓您可以添加和拆卸任何元件,無需螺釘或工具,其小輪廓可以讓您在鏡頭周圍添加啞光盒或附件。• 套件的核心部位是橡膠,防滑跟隨對焦輪連接到單個鋁 15 mm 桿夾上。夾具通過旋轉來配合大多數鏡頭尺寸,然後通過鎖定杆擰緊。夾具的旋轉還能讓對焦輪在更換鏡頭時輕鬆轉移位置。• 內含五個驅動齒輪,適合各種鏡頭尺寸:0.5 MOD/78T、0.6 MOD/64T、0.8 MOD/38T、0.8 MOD/43T 和 0.8 MOD/78T。齒輪可以由前向後翻轉,以方便不同的鏡頭配置。0.5 MOD/78T 齒輪還包含 49 mm 橡膠摩擦輪,該齒輪最常用於 DSLR 鏡頭。• 對於備用精細對焦配置,請使用隨附的速度曲柄或 11" 鞭子,兩者都連接到旋鈕的中心點。包括四個用於連接到對腳輪的磁標盤。
- 在旋鈕的中心,一個 ARRI 標準的附件端口,用於連接如鞭子或速度曲柄這種單獨的附件;
- 所有齒輪都可以翻轉到前部或後部位置,有助於緊湊型鏡頭配置;
- 兩個旋轉點(一個在桿上,一個在身體上),使跟焦器與相機機身的一側完全垂直對齊;
- 擺動臂設計讓您可以簡單地將跟焦器從鏡頭中拉出,快速更換鏡頭,然後在準備就緒時將其推回原位;
- 緊湊的設計佔用空間很小,因此您仍可以將啞光盒連接到正面;
- 使用擺動臂對齊跟焦器,然後可以擰緊底部的拇指螺釘固定 。
评价
目前还没有评论