The SHAPE Gold Mount pivoting battery plate for Sony FX9 attaches to the rear of the camera via a top plate and supports a Gold mount battery while leaving access to the camera’s standard battery compartment. Our Gold Mount battery plate provides the right battery voltage and amperage to use with your Sony FX9 camera. By pivoting the battery plate, you have access to the BPU battery of the camera that is hollow hot-swap. A swivel system let you pivot the battery plate horizontally and a magnet system let you clip everything in place. It features 1 D-Tap port for powering accessories. It also uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running.
It connects to the camera using the SHAPE 19.5V output D-Tap power cable for Sony FX9. The cable regulates the voltage from a D-Tap source to the proper 19.5 V required to power an FX9 camera. This allows you to power your camera using any V-mount or Gold mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″ (38 cm).
- Cable has a total end-to-end length of 15″ (38 cm)
- Connector 1: 1 x D-Tap
- Connector 2: 1 x DC Barrel
- Converts 14.4 volt to 19.5 volt required to power the Sony FX9