Camera arms, mounts and bags
Designed to optimize the manipulation of your camera accessories.
View cart “3 side cold shoe aluminum mount” has been added to your cart.
-
Revolt Push-Button Arm (9)
The Push Button Magic Arm system allows quick access to your camera accessories. Push, adjust, release, and then its lock. -
Magic Arms & Mounts (26)
Designed to optimize the manipulation of your camera accessories. -
Belts & Bags (6)
Camera belts and camera bags designed to optimize the manipulation of your camera accessories.
-
SHAPE Camera bag divider kit for SBAG
- CAD$42.90
- Add to cartDIVB
- 4 camera bag divider kit. 2 big (10 x 8 inches) – 2 small (8 x 6 inches). Made of strong polyester material with hard board internal structure. Easily removable to configure compartments inside the bag. Male and female Velcro strips and patches.
-
Super Mafer Clamp
- CAD$38.49
- Add to cartMCLP
- Made of robust aluminum. Jaw opening range: 13-55mm / 0.5-2.1 in. Protective pads offer strong gripping action. Jaw ratchet knob. ¼-20 threaded holes for accessories. Removable impact wedge inserts.
-
SHAPE On set AC Belt & Pouch tool kit
- CAD$97.90
- Add to cartSBTK
- Designed for camera assistants, grips, and techs. Made of durable nylon. Includes quick-release buckle, MOLLE webbing, and an accessory pouch. The belt is adjustable from 91 to 121 cm (36 to 48 in.).
-
SHAPE Pro Video Camera Backpack
- CAD$328.90
- Add to cartTBAG
- Wheeled carry-on with hidden backpack straps and a chest strap (20 x 13 x 9 inches). Inside dimensions: 16 x 11 x 6 in (41 x 28 x 15 cm). Hook-and-loop “A” accent on front MOLLE webbing on each side of bag. Mesh-lined water bottle pouch. Padded laptop compartment suspends your device to protect from impact. Large inside pocket for…
-
SHAPE Studio C-Stand Touch-Free Hand Sanitizer
- CAD$163.90
- Add to cartSCSTZ
- Touch-Free Stainless-Steel auto-dispenser with mounting clamps Help to reduce the spread of infection Designed with five levels of antibacterial hand gel supply from 0.5ml to 2.5ml Conform to COVID-19 protocols that productions, studios and rentals houses are implementing Extremely quiet operation, easy to install, easy setting button Built-in accurate Infrared motion sensor that detects your hand within one pass Compatible…
-
SHAPE SMALL FLEX ARM 1/4-20 TO 1/4-20 MONITOR MOUNT
- CAD$48.40
- Add to cartFLEX1
- ¼-20 to ¼-20 mounting flex arm Perfect to mount and adjust monitor, LED lights, or microphones at any angle Adjustable 20 mm ball heads on both ends with rubber rings to hold the arm's position Large T-handle locking lever provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting Supports up to 5 lbs Length…
-
SHAPE MEDIUM FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING
- CAD$71.50
- Add to cartFLEX2
- ¼-20 to 3/8-16 medium mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm's position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting…
-
SHAPE LARGE FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING
- CAD$141.90
- Add to cartFLEX3
- ¼-20 to 3/8-16 large mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at almost any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm's position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy…
-
SHAPE 11 INCHES MAGIC ARM CENTRAL LOCK ROSETTE WITH 1/4-20 CAPTIVE SCREW
- CAD$48.40
- Add to cartM11CS
- 11 inches Magic Arm with three points of articulation Perfect to mount monitor, LED lights, or microphones Swivel mechanism with ball joints let you position your accessory to any angle Strong lock central rosette joint with thumb knob ¼-20 captive screw with very tight lock system Each end features a rubber-topped platform to tighten your accessory Supports up to 10…
-
SHAPE 7 INCHES MAGIC ARM CENTRAL LOCK ROSETTE WITH 1/4-20 CAPTIVE SCREW
- CAD$42.90
- Add to cartM7CS
- 7 inches Magic Arm with three points of articulation Perfect to mount monitor, LED lights, or microphones Swivel mechanism with ball joints let you position your accessory to any angle Strong lock central rosette joint with thumb knob ¼-20 captive screw with very tight lock system Each end features a rubber-topped platform to tighten your accessory Supports up to 8.8…
-
SHAPE HIGH LOAD FRICTION ARM WITH CAMERA BRACKET
- CAD$163.90
- Add to cartLFWB
- High load friction arm with camera bracket Perfect to mount and adjust monitor, LED lights, or microphones at almost any angle Fully articulated arm with 90° pivotable and 360° rotatable ends Locking knob allows partial loosening for safe and precise positioning Ball joint at each end designed with 5/8" stud with 3/8” and ¼” female threads Supports up to 7…
-
3 side cold shoe aluminum mount
- CAD$22.00
- Add to cart3SHM
- Triple shoe mount made of CNC aluminum allows the use of multiple shoe rack accessories Perfect for vlogging and video shooting (3) Female cold shoe, perfect to attach microphone, LED video light or any other compatible devices (1) Male cold shoe designed with a thumbscrew knob with ¼-20 threaded hole to strongly attach the device to your camera body
-
SHAPE camera bag
- CAD$328.90
- Add to cartSBAG
- Made of resistant fabric Outside: 12 x 20 x 12 in (30 x 50.8 x 30 cm) Inside: 11 x 20 x 10 in (27.9 x 50.8 x 25.4 cm) Volume: 36 liters 3 removable pouches (tools – pens – cables) “Molle” system pattern for removable pouches Led light zippers in inner pockets of cover Fully padded interior Removable rain-dust…
-
Viewfinder adapter with Arri standard 3/8-16 interface male
- CAD$97.90
- Add to cartVFSA
- Viewfinder adapter compatible with the L-SHAPE pro top handle Designed with 15 mm standard clamp
-
15 mm rod clamp with Arri standard 3/8-16 interface male
- CAD$53.90
- Add to cartASTD15
- 15 mm rod clamp compatible with L-SHAPE pro top handle
-
SHAPE EVF adapter shoe dovetail Canon, Sony standard
- CAD$97.90
- Add to cartDVFCS
- Designed to attach OLED viewfinder Compatible with Canon and Sony viewfinder (Sony standard) Arri standard 3/8-16 male threaded with anti-rotating pins to be mounted on the top handle
-
Friction swivel and tilt monitor light, microphone mount cold shoe base
- CAD$38.50
- Add to cartSTMC
- Perfect for the manipulation of your monitor, light or microphone Cold shoe mount with swivel option Strongly fix your accessory with ¼-20 captive thumbscrew and antirotating pin
-
Offset monitor swivel rod mount 15 mm LW
- CAD$132.00
- Add to cartOMB15
- Allows you to offset your monitor on an inline configuration rig 8" 15 mm LW rod extension arm to mount your monitor to your rig Bracket let you attach your monitor with ¼-20 captive screw 15 mm rod clamp swivel mounts to 15 mm rods and allows change in the angle
-
SSD drive universal aluminum duck station clamp
- CAD$53.90
- Add to cartSSDOC
- Hold your SSD drive Made of CNC Aluminum
-
SHAPE telescopic Push-Button magic arm with mini quick release
- CAD$438.90
- Add to cartRTPQS
- Hold and manipulate accessories such as On-Board monitor Four Points of Articulation Supports up to 5 pounds of Gear Arm Extends from 6.5 to 13.3" Mini Delta Quick Release Top Mount ARRI Accessory Mount Compatible Spring-Loaded Locking Lever on Extension 3 x SHAPE's patented Push-Buttons system Push, adjust, release, and then its lock 3/8"-16 D-Ring Tie-Down Screw Made from CNC…
-
Friction tilt cold shoe mount for monitor, light, microphones
- CAD$37.40
- Add to cartFTCM
- Load Capacity: 4.4 lb Holds Monitor, Video Light, or Mic 1/4"-20 Threaded Mounting Socket 1/4"-20 Accessories Top Mount
-
2 axis Push-Button arm 15 mm rod bloc
- CAD$265.56
- Add to cartRP215
- Support Arm with 2-Axis Adjustment Patented Push-button system Push, adjust, release, and then its lock Perfect for the manipulation of your On-Board Monitor No Tools Required Fixed Arm Length of 3.5" 1/4"-20 D-Ring Screw for Accessories Snap-On 15 mm Rod Clamp with 1/4"-20 Stud Arm Features 1/4"-20 Mounting Hole Adjustment of Tilt and 360° Pan Axis Lightweight and made from…
-
2 axis Push-Button arm
- CAD$187.78
- Add to cartRPB2A
- Support Arm with 2-Axis Adjustment Patented Push-button system Push, adjust, release, and then its lock No Tools Required Fixed Arm Length of 3.5" 1/4"-20 D-Ring Screw for Accessories 1/4"-20 Slotted D-Ring Mounting Screw One Tilt Axis Articulation Point One 360° Pan Articulation Point Bottom section features 2 locking stoppers Lightweight and made from hard anodized aluminum
-
2 axis Push-Button arm with cold shoe
- CAD$187.78
- Add to cartRPB2AHS
- Perfect for the manipulation of your On-Board monitor; Compatible with all types of camera rigs with a cold shoe mount; Support Arm with 2 axis Push-Button system; Fixed Arm's length of 3.5" (8.89 cm); Quickly mount or dismount camera accessories to the Arm; Lightweight and made from hard anodized aluminum
-
2 axis Push-Button arm 3/8-16
- CAD$207.90
- Add to cartR382A
- Perfect for the manipulation of your On-Board monitor; Compatible with all type of camera rig with 3/8-16 threaded holes Support Arm with 2 axis Push-Button system; Fixed Arm's length of 3.5" (8.89 cm); Quickly mount or dismount camera accessories to the Arm; Quickly attach the Arm to your rig; Locking stoppers; Lightweight and made from hard anodized aluminum
-
4 axis Push-Button arm 15 mm rod bloc
- CAD$398.89
- Add to cartRP415
- Support Arm with 4-Axis Adjustment Two Tilt Axis Articulation Points Two 360° Pan Articulation Points Patented Push-button system Push, adjust, release, and then its lock No Tools Required Fixed Arm Length of 6.5" (16.51 cm) 1/4"-20 D-Ring Screw for Accessories Snap-On 15 mm Rod Clamp with 1/4"-20 Stud Arm Features 1/4"-20 Mounting Hole
-
4 axis Push-Button arm
- CAD$332.22
- Add to cartRPB4A
- Support Arm with 4-Axis Adjustment Two Tilt Axis Articulation Points Two 360° Pan Articulation Points Patented Push-button system Push, adjust, release, and then its lock No Tools Required Fixed Arm Length of 6.5" 1/4"-20 D-Ring Screw for Accessories 1/4"-20 Slotted D-Ring Mounting Screw
-
4 axis Push-Button arm 3/8-16
- CAD$350.90
- Add to cartR384A
- Perfect for the manipulation of your On-Board monitor Support Arm with 4 axis Push-Button system; Fixed Arm's length of 6.5" (16.51 cm); Quickly mount or dismount camera accessories to the Arm; Quickly attach the Arm to you rig; Locking stoppers; Lightweight & Robust, made of CNC aluminum Compatible with all type of camera rig with 3/8-16 threaded holes
-
15 mm LW rod bloc with 15 mm top clamp
- CAD$98.89
- Add to cartR15TC
- Quickly mount and dismount the support of your rig Strongly attach 15 mm stud to the top clamp device Compatible with any camera rigs with 15 mm rods
-
Telescopic support arm rod bloc with quick plate
- CAD$274.00
- Add to cartARM3
- Provides frontal support Single red knob for fast & easy adjustment CNC machined parts Lightweight hard anodized aluminum Stainless steel screws Increased stability & comfort
-
Telescopic support arm 15 mm rod bloc
- CAD$328.90
- Add to cartARM2
- Extension of 14 to 20" (36 - 51 cm) with a single knob Spring-Assisted inside the arm allows tilting up and down to get a better image while in motion Enable 360° rotation along the vertical and horizontal axes Cup-style base for comfort and stability Easy attachment and removal of the multi-function shoe Can be used to mount monitor, microphone…
-
Telescopic support arm
- CAD$219.00
- Add to cartARM1
- Camera mount bracket included Arm extension (14-20") CNC machined parts Lightweight hard anodized aluminum Stainless steel screws Increased stability, versatility & comfort
-
Magic arm 7 inches
- CAD$79.00
- Add to cartMA7
- Attaches Accessories to Camera Fully Extends Up to 7'' Supports Universal Hot Shoe Adapter Solid Aluminum Construction
-
Magic arm 11 inches
- CAD$89.00
- Add to cartMA11
- Attaches Accessories to Camera Fully Extends Up to 11'' Supports Universal Hot Shoe Adapter Solid Aluminum Construction
-
15 mm LW clamp for top handle
- CAD$53.90
- Add to cart15CTH
- Clamp designed to support a 15 mm rod Can be attach to our REVOLT Top Handle Made of CNC aluminum
-
19 mm studio clamp for top plate
- CAD$86.90
- Add to cart19CTH
- 19 mm Studio Rod Clamp made of CNC aluminum Can be mounted at the front of the Top Plate Easy positioning of 19 mm rods to set the accessories at the proper height Ratchet knob device for strong attachment
-
Ball head 1/4-20
- CAD$31.90
- Add to cartBALLHEAD
- Load Capacity: 5 lb 360° Rotation Hot/Cold Shoe Mountable 1/4"-20 Male and Female Threads
-
Multifunction shoe
- CAD$42.00
- Add to cartGIOTTO1
- Stabilizes Shoulder Rigs Attaches to a Telescopic Support Arm Cup Rests on Any Stable Surface Ball Joint for Flexible Positioning
-
Universal camera microphone shock mount
- CAD$42.90
- Add to cartMICMO
- Hold almost any microphone with a diameter sized 19-30 mm (0.75-1.2") Brand new and high-quality Fit for handheld microphone
-
SHAPE belt
- CAD$70.00
- Add to cartBELT1
- Increases user comfort and stability Padded design with two large loops at the front to hold extra accessories Can be used to attach tools and accessories for fast access Adjustable size with a strong velcro fastener
-
SHAPE belt xl
- CAD$82.00
- Add to cartBELTXL
- Supports the weight of shoulder rig. Requires SHAPE Telescopic support arm (ARM1-ARM2-ARM3) Made of durable nylon. Includes quick-release buckle, MOLLE webbing, and a support pouch The belt is adjustable from 91 to 121 cm (36 to 48 in.).
