Accessories
IN STOCK
$429.00
The TELESCOPIC SUPPORT ARM is a Manfrotto 233B Camera Mount Bracket (without the Manfrotto 143BKT camera plate). There is a cup at the extremity of the arm, providing a large surface of contact. The cup has a 4" (10 cm) diameter. The arm can be extended from 14" (36 cm) to 20" (51 cm). The arm can be placed everywhere around you, by rotating it on 360 degrees horizontally and vertically.
Simply place the cup on a stable surface. It can rest on your waist, your hip or your thigh. It can rests on the ground or a nearby wall for more stability. The cup can be quickly removed. The telescopic arm can then support accessories like a microphone or a camera light.
The TELESCOPIC SUPPORT ARM adds stability and versatility to the camera support.
IN STOCK
$199.00
The TELESCOPIC SUPPORT ARM comes in this kit with a ROD BLOCK.
This TELESCOPIC SUPPORT ARM is a Manfrotto 233B Camera Mount Bracket (without the Manfrotto 143BKT camera plate). A specially designed "L" bracket is used to attach the arm to the shoulder rig. There is a cup at the other extremity of the arm, providing a large surface of contact. The cup has a 4" (10 cm) diameter. The arm can be extended from 14" (36 cm) to 20" (51 cm). The arm can be placed everywhere around you, by rotating it on 360 degrees horizontally and vertically.
Simply place the cup extremity on a stable surface. It can rest on your waist, your hip or your thigh. It can rests on the ground or a nearby wall for more stability. The cup can be quickly removed. The telescopic arm can then support accessories like a microphone or a camera light.
The TELESCOPIC SUPPORT ARM adds stability and versatility to the shoulder rig.
IN STOCK
$249.00
The SHAPE BELT is the perfect accessory for all our camera supports equipped with the TELESCOPIC SUPPORT ARM.
The SHAPE BELT has two large loops at the front. These loops are designed to hold the cup found at the extremity of the TELESCOPIC SUPPORT ARM. Instead of resting the cup directly on you, the cup rests on the SHAPE BELT. Your comfort and the stability of the camera support are thus increased.
The SHAPE BELT has additional loops that can be used to attach tools and accessories near you for a fast access.
The belt is comfortable and padded. The size of the belt is easily adjustable using the strong Velcro buckle.
IN STOCK
$69.00
The SHAPE BOX is a video accessories holder. It is designed to conveniently hold video camera accessories near your camera. The SHAPE BOX is the perfect solution for accessories such as wireless audio receivers, audio recorders, hard drive recorders, battery packs and more.
No more hassle figuring out where to securely place these accessories. The SHAPE BOX protects them and keeps them firmly in place near your camera. The length of the connectors needed, to connect the accessories to your camera, is thus very short. There are less connectors hanging around and getting in the way.
The SHAPE BOX is a simple and affordable solution to protect your expensive video accessories!
No more hassle figuring out where to securely place these accessories. The SHAPE BOX protects them and keeps them firmly in place near your camera. The length of the connectors needed, to connect the accessories to your camera, is thus very short. There are less connectors hanging around and getting in the way.
The SHAPE BOX is a simple and affordable solution to protect your expensive video accessories!
IN STOCK
$69.00
The BP6000 BASE PLATE has a unique design destined for professional cameras like the SONY F3, EX1, EX3, The PANASONIC AF100/101, P2, and plenty of other camera models with interchangeable lenses.
The BASE PLATE 6000 should be used with cameras featuring electronic viewfinders or external monitors. Made of solid anodized aluminum, The BP6000 provides a perfect fit to Panasonic and Sony camera plates with its perfect fit V-lock delta adaptor on the bottom.
IN STOCK
$1 999.00
The DOUBLE BRACKET is a component of the PAPARAZZI II and PAPARAZZI II PRO.
This bracket is used to attach the double handle to the PAPARAZZI RISER.
IN STOCK
$49.00
The FOLLOW FOCUS FRICTION CLIC provides precise focusing, quick adjustments and great durability.
Thanks to our first patented leaver clamp system, adjusting the horizontal position of the focus mechanism is a breeze:
The FOLLOW FOCUS FRICTION CLIC is designed for standard 15mm rods. It can be instantly attached/detached to/from the rods using our second patented lever clamp system. Simply put it directly on top of the rods and lock the lever. It couldn’t be simpler!
IN STOCK
$499.00
The FOLLOW FOCUS FRICTION RISER RAIL KIT is a simple and effective follow focus solution. Simply attach your camera to the camera platform and adjust the position of the follow focus to fit your lens. No tools required!
This kit consists of a camera platform with standard 15mm rods (15MM ROD RISER SYSTEM) and a follow focus (FOLLOW FOCUS FRICTION CLIC). It offers all the necessary adjustments to position the follow focus to perfectly fit your camera and lenses.
IN STOCK
$629.00
The GIOTTO MULTIFUNCTION SHOE is attached at the extremity of the TELESCOPIC SUPPORT ARM.
Sold with the extension rod.
IN STOCK
$29.00
The QUICK HANDLE ROSETTE is designed for ARRI cameras with the ARRI rosette socket.
It is built with our patented quick lock button.
Each QUICK HANDLE ROSETTE is composed of a handle and an arm. The handle can rotate on 360 degrees. Simply push and hold the quick lock button, located at the articulation between the handle and the arm, and rotate the handle. Once the button is released, the handle is locked and stays firmly in place.
Try as hard as you want, once locked, the handle will not move!
IN STOCK
$1 499.00
The QUICK HANDLE is our very own, patented handle.
The QUICK HANDLE is composed of two handles. Each handle can rotate individually on 360 degrees. Simply push and hold the button, located at the articulation, and rotate the handle. Once the button is released, the handle stays firmly in place and will not moved at all.
When installed on a COMPOSITE camera support, the QUICK HANDLE is equipped with a ROD BLOCK used to attach it to 15mm rods. The QUICK HANDLE can slide along the rods for precise positioning.
To secure the position of the QUICK HANDLE, simply tighten the small red knob found on the ROD BLOCK.
IN STOCK
$349.00
The QUICK HANDLE is our very own, patented handle.
The QUICK HANDLE is composed of two handles. Each handle can rotate individually on 360 degrees. Simply push and hold the button, located at the articulation, and rotate the handle. Once the button is released, the handle stays firmly in place and will not moved at all.
Note: If your camera support is equipped with the HAND4 DOUBLE C HANDLE, you can upgrade it with the HAND6 QUICK HANDLE (not the HAND5 QUICK HANDLE). The HAND6 QUICK HANDLE is the same handle as the HAND5 QUICK HANDLE. The difference is that the HAND6 QUICK HANDLE can be attached to camera supports compatible with the HAND4 DOUBLE C HANDLE.
IN STOCK
$299.00
The lens support helps holding the weight of the lens. Thus less weight is put on the camera.
The LENS SUPPORT is composed of a lens support bracket and a
SLIDING ROD BLOCK. The lens rests on the lens support bracket. The height of the lens support bracket is adjustable.
The LENS SUPPORT is attached to the 15mm rods. The LENS SUPPORT is compatible with all our camera supports equipped with the 15MM ROD SYSTEM or the 15MM ROD RISER SYSTEM.
Made of lightweight anodized aluminum for strength and durability.
COMPATIBILITY:
IN STOCK
$99.00
This quick release adapter gives you the freedom to remove the camera from the head and put it on any other support. Supplied with two 1/4" and two 3/8” camera screws. Sliding travel of plate: 80mm.
More details on the Manfrotto web site.
IN STOCK
$75.00
Used to position your DSLR camera on the left or the right side of your camera support.
This way, your DSLR camera is positioned nearer to the center of your face.
COMPATIBILITY:
- CAMELEON Series
- RED MAMOUTH Series
- SPIDER Series
- SUMO Series
- PAPARAZZI Series
- PAPARAZZI RISER
- COMPOSITE Series
IN STOCK
$19.00
IN STOCK
$249.00
High quality custom-made V shaped adaptor for quick release plate. Compatible with the MARBEL QUICK RELEASE PLATE. Compatible with the Sony VCT-U14 quick release tripod adapter and similar quick release plates.
You can attach the MARBEL DELTA ADAPTOR under your camera and attach the quick release plate on top of your camera support. You can then quickly attach/detach your camera from the camera support.
You can also attach the MARBEL DELTA ADAPTOR under your camera support and attach the quick release plate to a tripod head.
You can then quickly attach/detach your complete camera support from the tripod head. This functionality only works with the following camera supports:
Note that large quick release plates may not fit under these camera supports.
IN STOCK
$125.00
High quality custom-made quick release plate.
Compatible with the:
- MARBEL DELTA ADAPTOR
- V shaped adaptors used with cameras such as the Sony EX3.
You can attach the MARBEL QUICK RELEASE PLATE on the camera platform of your camera support.
If your camera is equipped with the MARBEL DELTA ADAPTOR, or a similar V shaped adaptor, you can quickly attach/detach your camera from the camera support.
IN STOCK
$145.00
Main features of the MOUNTAIN camera support:
- Strong Powr-Grip vacuum cup.
- Can be attached to any smooth or relatively smooth nonporous surface: glass, metal, plastic, ceramic and even varnished wood.
- Maximum load capacity of 7.5 lbs (3.4 kg).
- Red line on the pump plunger indicates if the vacuum cup is attached securely or not.
- The camera bracket (included) can be replaced by a tripod head (not included).
IN STOCK
$199.00
The PAPARAZZI I HANDLE is large and comfortable. The handle has various threaded holes (1/4-20 and 3/8-16). The threaded holes are located on the sides, on top of and below the handle. These threaded holes are used to attach any accessory you may need: LED lights, spot lights, LCD screens, remote controls, microphones, grips, audio recorders, padded handles, etc.
Made of lightweight anodized aluminum for strength and durability.
Compatible with the PAPARAZZI RISER.
Note: To attach accessories to the PAPARAZZI I HANDLE, adaptors such as the Manfrotto 118 Short Spigot may be required. These adaptors are not included and must be purchased separately.
IN STOCK
$169.00
The PAPARAZZI II HANDLE is large and comfortable. The handle has various threaded holes (1/4-20 and 3/8-16). The threaded holes are located on the sides of the handle, on top of the handle and below the handle. These threaded holes are used to attach any accessory you may need: audio recorders, LED lights, spot lights, LCD screens, remote controls, microphones, grips, audio recorders, padded handles, etc.
Made of lightweight anodized aluminum for strength and durability.
Compatible with the PAPARAZZI RISER. Note that the DOUBLE BRACKET is necessary to attach the PAPARAZZI II HANDLE to the PAPARAZZI RISER. The DOUBLE BRACKET is not included with the PAPARAZZI II HANDLE.
Note: To attach accessories to the PAPARAZZI II HANDLE, adaptors such as the Manfrotto 118 Short Spigot may be required. These adaptors are not included and must be purchased separately.
IN STOCK
$299.00
The BACK PAD is padded on one side. It weights 0.35 lb (0.160 kg). The BACK PAD adds stability and comfort to the camera support.
The BACK PAD is attached to the shoulder rig with a screw knob. The BACK PAD can easily be positioned to fit your body type: up and down by 1-1/4" (3 cm) and left and right on 360 degrees. When not needed, you can easily remove the BACK PAD from the camera support.
The BACK PAD also have a 1/4-20 threaded hole that can be used to attach a SHAPE BOX or any other accessory.
The BACK PAD is compatible with all our camera supports (with the exception of the MOUNTAIN camera support).
IN STOCK
$49.00
Don’t know where to put your Anton Bauer battery plate? The BACK PAD ANTON BAUER is the solution.
The Anton Bauer battery plate is screwed to a BACK PAD. The BACK PAD is simply attached to the back of your camera support. The Anton Bauer battery plate is thus conveniently positioned behind your shoulder and near your camera.
Anton Bauer battery plate included. Compatible with all our camera supports.
IN STOCK
$299.00
Using a COMPOSITE camera support and don’t know where to put your Anton Bauer battery plate? This accessory is the solution.
The Anton Bauer battery plate is screwed to a BACK PAD equipped with a ROD BLOCK. This way, the Anton Bauer battery plate can be attached to 15mm rods (using the ROD BLOCK). Simply attach it above the shoulder pad of your COMPOSITE camera support. The Anton Bauer battery plate is thus conveniently positioned above your shoulder and near your camera.
Anton Bauer battery plate included. Compatible with the COMPOSITE camera supports.
Additional 15mm rods are required and are not included.
IN STOCK
$349.00
The COUNTER WEIGHT is padded and weights 4 lb (1.780 kg). The COUNTER WEIGHT adds stability to the camera support by counterweighting the weight of the camera towards the back. It relieves some of the camera weight from the handles.
The COUNTER WEIGHT is attached to the camera support with a screw knob. The COUNTER WEIGHT can easily be positioned to fit your body type. When not needed, you can easily remove it from the camera support.
The COUNTER WEIGHT is compatible with all our camera supports.
IN STOCK
$69.00
The BASE COUNTER WEIGHT is used with the ADJUSTABLE COMPOSITE SHOULDER PAD. It weights 4 lbs (1.82 kg) and is padded for superior comfort. The BASE COUNTER WEIGHT adds stability to the composite camera supports.
The BASE COUNTER WEIGHT is attached to the shoulder pad using 15mm rods. Since it can slides along the rods, you can position the BASE COUNTER WEIGHT nearer or further from you for precise counter-weighting.
The BASE COUNTER WEIGHT comes equipped with a ROD BLOCK. The ROD BLOCK is used to attach the BASE COUNTER WEIGHT to the rods.
Made of lightweight aluminum professionally covered with black powder coat paint.
IN STOCK
$129.00
When you need serious counter-weighting, the ADDITIONAL COUNTER WEIGHT adds 4 lbs (1.82 kg) to the BASE COUNTER WEIGHT for a total of 8 lbs (3.63 kg).
The ADDITIONAL COUNTER WEIGHT is attached to the BASE COUNTER WEIGHT with two screws.
Made of lightweight aluminum for strength and durability. It is powder coat painted with a professional looking wrinkle finish.
IN STOCK
$49.00
Don’t know where to put your IDX battery plate? The BACK PAD IDX is the solution.
The IDX battery plate is screwed to a BACK PAD. The BACK PAD is simply attached to the back of your camera support. The IDX battery plate is thus conveniently positioned behind your shoulder and near your camera.
IDX battery plate included. Compatible with all our camera supports.
IN STOCK
$299.00
Using a COMPOSITE camera support and don’t know where to put your IDX battery plate? This accessory is the solution.
The IDX battery plate is screwed to a BACK PAD equipped with a ROD BLOCK. This way, the IDX battery plate can be attached to 15mm rods (using the ROD BLOCK). Simply attach it above the shoulder pad of your COMPOSITE camera support. The IDX battery plate is thus conveniently positioned above your shoulder and near your camera.
IDX battery plate included. Compatible with the COMPOSITE camera supports.
Additional 15mm rods are required and are not included.
IN STOCK
$349.00
The RED ONE PLATE is used with the ROD BLOCK.
Simply insert a ROD BLOCK on the rods of the RED ONE PLATE. Attach the RED ONE PLATE to the RED ONE camera.
The ROD BLOCK is then available to attach accessories such as the TELESCOPIC SUPPORT ARM or the QUICK HANDLE.
The 15mm rods are 4” long. The ROD BLOCK is not included.
IN STOCK
$239.00
The RED ONE PLATE is used with the ROD BLOCK.
Simply insert a ROD BLOCK on the 15mm rods of the RED ONE PLATE. Attach the RED ONE PLATE to the RED ONE camera.
The ROD BLOCK is then available to attach accessories such as the TELESCOPIC SUPPORT ARM or the QUICK HANDLE.
The 15mm rods are 8” long. The ROD BLOCK is not included.
IN STOCK
$249.00
The OFF-SET RAIL BLOCK is used to attach the PAPARAZZI RISER to the left or to the right of the 15MM RODS.
The OFF-SET RAIL BLOCK has two screw-threaded holes on its side. These holes are used to screw the OFF-SET RAIL BLOCK to the PAPARAZZI RISER. One OFF-SET RAIL BLOCK is attached to the front of the PAPARAZZI RISER. A second OFF-SET RAIL BLOCK is attached to the rear of the PAPARAZZI RISER.
The other extremity of each OFF-SET RAIL BLOCK is attached to a ROD BLOCK. The slot allows screwing each OFF-SET RAIL BLOCK to a ROD BLOCK.
Made of lightweight anodized aluminum for strength and durability.
IN STOCK
$129.00
The 15MM ROD SYSTEM is part our solution for advanced video accessories like matte boxes, 35mm lens adapter and follow focus mechanisms. The 15MM ROD SYSTEM holds the weight of these accessories so no additional weight is put on the lens.
The 15MM ROD SYSTEM consists of a bracket and two 15mm aluminum rods. The rods are 8" (20.3 cm) long and have 1/2-13 threaded female tips. It is possible to screw other 15mm rods. The 15MM ROD SYSTEM is attached to the front of the camera supports using a 4mm hexagonal key. It can easily be removed when not needed.
The rods can be moved along the bracket in order to adjust their horizontal position. Simply unscrew the small knob, position the rods and screw the knob tightly to keep the rods in place. No tool is required to adjust the horizontal position of the rods.
The height of the rods is adjustable by up to 1 3/8" (3.5 cm) in order to match the height of the video accessory. For example, you may have to lower the rods in order to match the height of a matte box. A 4mm hexagonal key is required to adjust the height of the rods.
IN STOCK
$149.00
The 15MM ROD RISER SYSTEM is part of our solution for advanced video accessories like matte boxes, 35mm lens adapter and follow focus mechanisms. The 15MM ROD RISER SYSTEM holds the weight of these accessories so no additional weight is put on the lens.
The 15MM ROD RISER SYSTEM is composed of the PAPARAZZI RISER, a SLIDING ROD BLOCK and two 15mm rods (8" / 20.3 cm long).
The 15MM ROD RISER SYSTEM is very easy to use:
- Attach the system to the camera support.
- Attach your camera to the system.
- Attach you video accessory to the rods.
IN STOCK
$199.00
The ROD BLOCK is designed to attach a component to 15mm rods. It has two screw-threaded holes used to attach components such as the QUICK HANDLE. Once attached, the component can slides along the rods.
To secure the position of the ROD BLOCK along the rods, simply tighten the small red knob.
The ROD BLOCK is compatible will all our 15mm rods.
Made of lightweight anodized aluminum for strength and durability.
IN STOCK
$59.00
The SLIDING ROD BLOCK is designed to attach 15mm rods to the front of the following camera supports and components:
- CAMELEON series
- RED MAMOUTH series
- SPIDER series
- SUMO series
- PAPARAZZI series
- ADJUSTABLE COMPOSITE SHOULDER PAD
- PAPARAZZI RISER
The RAIL BLOCK (2 INCHES) or the RAIL BLOCK (2 3/4 INCHES) is required to attach the SLIDING ROD BLOCK. The RAIL BLOCK is placed between the SLIDING ROD BLOCK and the camera support. With the RAIL BLOCK, the vertical position of the SLIDING ROD BLOCK is adjustable (the rods can be positioned higher or lower). A 4mm hexagonal key is required to attach the SLIDING ROD BLOCK and to adjust its height.
To secure the position of the SLIDING ROD BLOCK along the rods, simply tighten the small red knob.
The SLIDING ROD BLOCK is compatible will all our 15mm rods. Made of lightweight anodized aluminum for strength and durability.
IN STOCK
$69.00
The DOUBLE SLIDING ROD BLOCK allows the addition of a second level of 15mm rods.
Two levels of 15mm rods greatly help to setup accessories such as follow focus mechanisms, 35mm lens adaptor and matte boxes. See the presentation video in the product details.
IN STOCK
$129.00
The COMPOSITE SHOULDER PAD is a core component for our COMPOSITE F3 camera support.
The COMPOSITE SHOULDER PAD rests on your shoulder. This way, your body supports the weight of the camera and its accessories. It is padded for superior comfort.
The ROD BLOCK on the top is used to hold 15mm rods, attaching the camera platform to them. For example, you can attach a PAPARAZZI RISER as a camera platform. By adding extra male-female rods at the back, you can also attach a BASE COUNTER WEIGHT to the rear of the same rods.
IN STOCK
$169.00
The ADJUSTABLE COMPOSITE SHOULDER PAD is a core component for our COMPOSITE SERIES camera supports.
The ADJUSTABLE COMPOSITE SHOULDER PAD rests on your shoulder. This way, your body supports the weight of the camera and its accessories. It is padded for superior comfort.
The ROD BLOCK on the top is used to hold 15mm rods. You can attach a camera platform to the front of these rods. For example, you can attach a PAPARAZZI RISER as a camera platform. You can also attach a BASE COUNTER WEIGHT to the rear of the same rods.
IN STOCK
$169.00
IN STOCK
$6.00
IN STOCK
$6.00
NANUK cases are designed to protect the most sensitive equipment in the harshest environments.
Every detail of NANUK protective cases has been refined and perfected to offer the utmost in protection and performance: waterproof, impact resistant, crushproof, dustproof, padlockable and stackable.
- Color: Grey
- Exterior dimensions:
- L640mm x W505mm x H250mm
- L22.0" x W17.0" x H8.2"
- Interior dimensions:
- L22.0" x W17.0" x H8.2"
- L550mm x W430mm x H235mm
See the complete description on the NANUK website.
IN STOCK
$349.00
NANUK cases are designed to protect the most sensitive equipment in the harshest environments.
Every detail of NANUK protective cases has been refined and perfected to offer the utmost in protection and performance: waterproof, impact resistant, crushproof, dustproof, padlockable and stackable.
- Color: Black
- Exterior dimensions:
- L640mm x W505mm x H250mm
- L22.0" x W17.0" x H8.2"
- Interior dimensions:
- L22.0" x W17.0" x H8.2"
- L550mm x W430mm x H235mm
See the complete description on the NANUK website.
IN STOCK
$349.00
Using a COMPOSITE camera support and don’t know where to put your Anton Bauer battery plate? The VERTICAL ANTON BAUER ROD BLOCK is the solution. With this accessory you can easily attach an Anton Bauer battery to standard 15mm rods. The battery is then positioned vertically.
The VERTICAL ANTON BAUER ROD BLOCK is composed of an Anton Bauer Gold Mount Battery Plate (QRC-GOLD, Universal Compact Mounting Plate) attached to a solid aluminum plate. A ROD BLOCK is also attached to the aluminum plate.
IN STOCK
$349.00
Using a COMPOSITE camera support and don’t know where to put your IDX battery plate? The VERTICAL IDX ROD BLOCK is the solution. With this accessory you can easily attach an IDX battery to standard 15mm rods. The battery is then positioned vertically.
The VERTICAL IDX ROD BLOCK is composed of an IDX Gold Mount Battery Plate (QRC-GOLD, Universal Compact Mounting Plate) attached to a solid aluminum plate. A ROD BLOCK is also attached to the aluminum plate.
IN STOCK
$349.00
Used to attach your camera to our camera supports.
COMPATIBILITY:
- CAMELEON Series
- RED MAMOUTH Series
- SPIDER Series
- SUMO Series
- PAPARAZZI Series
- PAPARAZZI RISER
- COMPOSITE Series
IN STOCK
$14.00
MY CART
Your cart is empty.
SAFE SHOPPING
